Bedienungsanleitung AEG vcr 4500 (Seite 77 von 80) (Deutsch)

135583

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

13 EN

QUICK-FIND

This function enables you to search and confirm the contents

of the recorded programme(s) using the index mark.

• Use the remote control for this procedure.

• The tape must be fully rewound.

1) Press

QUICK-FIND.

To Skip to the Beginning of Next Programme

1) Press QUICK-FIND.

To View at Normal Speed

1) Press PLAY/o. The Quick-Find is cancelled.

Note: • This function will not operate in the Recording mode.

• When you want to cancel the Quick-Find while in

progress, press STOP/L.

• When the end of a tape is reached during the Quick-

Find, the tape will automatically rewind to the

beginning. After rewinding finishes, the VCR will

eject the tape and turn itself off.

INDEX SEARCH

• The index mark will be made automatically when

REC/OTR is pressed. It will also be marked at the starting

point of Timer recording and OTR.

• The index mark is not recorded if PAUSE/STILL is pressed

and released during recording.

• The time gap between index marks on the tape should be

greater than 1 minute for SP recording and 2 minutes for

LP recording.

• Use the remote control for this procedure.

1) Press

SEARCH MODE.

2) Press

PLAY/o or STOP/L repeatedly until the number of

programmes that you want to skip appears.

3) Press REW/s or F.FWD /B.

The VCR begins rewinding or fast forwarding to the

beginning of desired programme.

When the preset programme is reached, the VCR will start

playback automatically.

Note: • Index Search can be set up to 20.

• This function will not operate in the Recording mode.

• Operations must be followed up within 30 seconds,

from steps 2) to 3). Otherwise the Index Search mode

will be cancelled.

• To exit the Index Search mode, press MENU in step 2).

Or press

STOP/L after step 3).

TIME SEARCH

If a tape includes both programmes recorded in the PAL

system and ones recorded in the NTSC system, this function

may not be operated correctly.

• Use the remote control for this procedure.

1) Press

SEARCH MODE twice.

2) Press

PLAY/o or STOP/L repeatedly until the desired

time appears.

3) Press

REW/s or F. FWD /B.

The VCR begins rewinding or fast forwarding to the

specified point.

When 0:00 is reached, the VCR will start playback

automatically.

Note: • Time Search can be set up to 9 hours 59 minutes

(9:59).

• This function will not operate in the Recording mode.

• Operations must be followed up within 30 seconds,

from steps 2) to 3). Otherwise the Time Search mode

will be cancelled.

• To exit the Time Search mode, press MENU in step 2).

Or press STOP/L after step 3).

Copying a Video Tape

You can make copies of videotapes made by friends or relatives

for your own enjoyment.

WARNING:

• Unauthorized recordings of copyrighted video

tapes may be an infringement of copyright

laws.

Connect the recording VCR (this unit), playing VCR (another

VCR) and your TV as outline in the following diagram.

1) Insert a pre-recorded videocassette into the playing VCR.

2) Insert a blank videocassette, or one you want to record

over, into the cassette compartment of the recording

VCR.

3) Press

SPEED/SYSTEM on the remote control to select the

desired recording speed (SP/LP).

4) Select “AV2” position on the recording VCR. See “Other

Connections”.

5) Press

REC/OTR on the recording VCR.

6) Begin playback of the tape in the playing VCR.

7) To s t op r ec o rdi n g, p re s s STOP/EJECT on the recording

VCR, then stop playback of the tape in the playing VCR.

Note: • For best results during dubbing, use the VCR’s front

panel controls whenever possible. The remote control

might affect the playback VCR's operation.

• If video or colour fades in and out, you may be

copying a copy guarded video tape.

To Monitor the Recording

Turn on the TV and select the video channel on the TV.

A Status Display

To check the Counter, or Clock & Channel number, press

DISPLAY. Each time you press DISPLAY, TV screen will

change as illustrated:

When you select the channel using the

number buttons, select

the desired channel (position number).

Note: If the on screen display or indicators on the front panel

show an abnormal reading or no reading, unplug the

VCR for 2 minutes, then replug it again.

Please note that language, clock, and timer settings will

be cleared after disconnection.

AV2 (DECODER) AV1 (TV)

AUDIO

OUTPUT

AERIAL

RF OUT

to RF OUT

to aerial

socket

[Source (Playing) VCR <Monaural>]

(another VCR)

to 21-Pin

Scart Jack

[TV set]

(Use for monitoring)

[Editing (Recording) VCR]

(this unit)

Coaxial cable (supplied)

■

0:12:34

■

17:40

P02

<CLOCK and CHANNEL

NUMBER mode>

Press once. Press once.

Press once.

HG462ED(EN).fm Page 13 Wednesday, March 3, 2004 7:49 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG vcr 4500 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info