782361
112
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
106
SCOOPY+ S - User Manual
6. How to use the remote access service
6.1. Using the remote assistance
This service allows the AETA support staff to access the codec, for help or possible investigation.
What you need on the SCOOPY+ S:
Up-to-date firmware (1.09 minimum). No additional option is required.
Internet access, for instance via an Ethernet connection to a LAN. But other IP connections are
suitable as well: mobile data access…
6.1.1. Step 1: connect the SCOOPY+ S to the server
Menu Tools > Maintenance > Remote Assistance: activate "Remote Assistance".
If a "Remote Access" option is installed, the menu is Tools > Maintenance > Remote Access, activate
"Allow Remote Access".
If necessary, select the desired IP interface to be used for the remote access connection: "Network
Interface" (with the "Auto" choice, it will be the same that is used for audio over IP transmission).
To check the successful connection: menu Tools > About, "Remote Access Status".
Take note of the MAC address of the main Ethernet interface: menu Tools > About.
Variation: you can also use the "REMOTE ACCESS" html page for this step:
Maintenance tab, REMOTE ACCESS page, check "Allow Remote Assistance".
If a "remote access" option is installed, MAINTENANCE tab, REMOTE ACCESS page, check "Allow Remote
Access".
On the same page, you can select the IP interface that the codec will use for connecting to the service:
"Network Interface". For using always the same interface as for AoIP transmission, select "Auto".
To check the successful connection: STATUS page, GENERAL section.
Take note of the MAC address of the main Ethernet interface: NETWORK tab, ETHERNET PARAMETERS page.
6.1.2. Step 2: open the remote session
Tell the AETA technician the MAC address of the codec; this is the unique identifier for the device.
AETA can then set a control session over the codec. The link is secure and encrypted.
You may disable remote assistance once the intervention is over. This is recommended for avoiding
useless data traffic.
112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aeta Scoopy plus S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info