Bedienungsanleitung Afinia H-Series (Seite 34 von 43) (Englisch)

534691

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Afinia H-Series 3D Printer User’s Manual

Tips & Tricks

Preheat the platform before printing

Large parts can sometimes have their corners lift from the platform, which causes the part to

distort. This is caused by uneven heat across the surface of the platform.

Preheating the platform (see page 26) to at least 90 degrees C when printing with ABS is a step

you don’t want to miss. Having the platform heated before print starts helps ensure that the

model will remain adhered to the platform during printing.

You can monitor the platform temperature in the Maintenance window.

Level Platform and Correct Nozzle Height

One key to both successful printing and removal of the print raft is to make sure the platform is

level and that the nozzle height is set correctly. Use the Maintenance window to bring the nozzle

close to the print surface, then the Platform Calibration utility to level the platform and set the

nozzle height (see pages 13-14).

Be sure to use the calibration utility to help compensate for any parts of the print surface that aren’t

level!

Position the parts as close to the center of the platform as possible

The center of the platform is where the heating is most regulated, which helps to keep the support

raft adhered to the platform. Try to avoid printing any object near the edges of the platform.

Model Orientation Tips

Generally, follow these three simple tips on model orientation for better print results:

a) Position the model so the largest flat surface is on the bottom

b) If your model has any cylindrical parts (either solid or holes), position them so they are

vertical

c) Minimize support material by orienting the model with as many concave surfaces up

as possible

Remember, these tips may not be able to be applicable to all models. Each model is unique and

each has the best orientation for printing.

Scaling your Model

Not only can the Afinia 3D software scale your model in all three dimensions, you can use the

Scale function to change the size in any one of the three dimensions independently. For

instance, you can make your model taller by setting the scale factor and clicking just the Z Axis

button without affecting the width or depth (see page 21).

Merging and Rafts

Positioning multiple models too closely in the software can result in overlapping rafts, which can

lead to printing failure. If you do change the model positions once they’ve been positioned

automatically, use the Merge function in the Edit menu before printing to have the software

eliminate that problem by creating a single raft where they may be overlapping.

Be sure to save these merged models if you will be regularly printing them as a group!

Minimal Support Material Use

The latest versions of the Afinia 3D Software includes a feature that allows you to avoid most

support material. When specifying the Print Preferences, select Only Base for the Support Area

setting (see page 25-26).

Support material around the bottom of the model will still be generated, but the amount of support

material will be greatly reduced.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Afinia H-Series Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info