Bedienungsanleitung Afinia H-Series (Seite 35 von 43) (Englisch)

534691

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Afinia H-Series 3D Printer User’s Manual

Shell Setting Tips

The Shell option for the print Fill setting can be used to create truly hollow prints, saving time and

material. However, not all models can be printed with this fill setting.

Models with relatively small horizontal or near-horizontal surfaces are potential candidates for

shell printing, as these surfaces require little or no internal support to be successfully printed.

Remember, each model is different – you may need to experiment with each model to find out if it

can be used with Shell printing.

Decrease print time where possible

The faster you can print parts, the less lifting from the platform you are likely to get. Some ways

to increase print quality include:

• If possible, try to avoid printing large parts in solid mode

• Set the layer resolution to as large a value as possible while still retaining the quality

needed for the finished part

• Print the part in Normal or Fast mode

• If printing multiple parts at once, reduce the number of parts that are being printed

Pause During Print: Changing Filament

If you need to change the filament during printing, you can either use the Pause Print button in the

Maintenance window or enter in automatic pauses when you are setting up the print parameters

(see page 27).

When paused, click the Withdraw button to remove the current filament. After changing

filaments, insert the new filament and click the Extrude button to load your new filament.

If you have changed colors, you may need to extrude a few times to remove the last of the

previous filament color.

Keep the extruded filament connected to the nozzle – pull it from the nozzle just before the nozzle

contacts the print surface when resuming the print to keep any stray strands from sticking to your

model.

Model Creation: What does “Manifold” mean?

For any model to print correctly, it should be a manifold object. What this means is, as simply as

possible, is that each edge must be in contact with two and only two surfaces. Most design

software will allow you to create non-manifold objects, which can result in print problems.

The most common way for a model to become non-manifold is when several objects are joined

together, creating surfaces in the model that are in contact with or crossing through each other.

The Fix function in the Edit menu of the Afinia 3D software may repair the non-manifold problem

areas, but the best solution is to correct any problems in your design software. Many software

packages have functions to check for and repair any non-manifold models – the documentation for

your software should be consulted.

Model Creation: What does “Surface Normalization” mean?

The outer layer of every 3D printed object is actually composed of an outer surface and an inner

surface. Surface Normalization means these surfaces are pointing the correct way. If you have

an outer surface buried inside your model, or have an inner surface on the outside of the model,

you will need to normalize the surfaces.

The most common way for non-normalized surfaces to appear is when two surfaces cross each

other in the model.

The Fix function in the Edit menu of the Afinia 3D software may resolve the surface problems, but

the best solution is to correct any problems in your design software. Many software packages

have functions to check for and remove any non-normalized surfaces – the documentation for your

software should be consulted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Afinia H-Series Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info