Bedienungsanleitung Air-O-Swiss E2441 (Seite 9 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

11

CAUTION

Damage to the unit due to removal of the float

body (styrofoam)!

Do not remove the float body (styrofoam) when

unpacking the unit.

▶

Push the new evaporator wick onto the

float basket.

To close the float assembly, place the

float tip on the float basket and the evapo-

rator wick, push down and turn clockwise

(CLOSE arrow).

To check, gently pull the float tip upwards. In do-

ing so, it should not lift off the float basket.

If necessary, turn the float tip again and re-

check.

Insert the float assembly into the empty water

base.

Put the unit together (see chapter "Putting the

unit together").

Replacing the Ionic Silver Stick

®

Unit is taken apart and emptied from water.

Remove the Ionic Silver Stick

®

from the bottom

of the water base and discard it.

Place the new Ionic Silver Stick

®

in the holder at

the bottom of the water base.

Insert the float assembly into the empty water

base.

Put the unit together (see chapter "Putting the

unit together").

Putting the unit together

Unit is taken apart and emptied from water.

Insert the float assembly into the water base.

Place the water base including the float

assembly on the base handles into the base.

Place the upper part onto the base.

Ensure that the unit is put together cor-

rectly.

Ensure that there are no foreign objects in the

unit.

The unit is put together.

Transporting the unit

CAUTION

Risk of injury by falling parts!

Always handle the unit by the base when un-

packing and lifting.

▶

CAUTION

Water damage due to water spilling over!

Empty the unit before transporting.▶

Empty the unit (see chapter "Taking apart and

emptying the unit").

Dry the unit.

Pick the unit up by the base and carry it to the

desired location.

3.

4.

5.

6.

7.

8.

✔

1.

2.

3.

4.

✔

1.

2.

3.

4.

5.

➥

1.

2.

3.

H 3H 3

H 4H 4

B 5B 5

BB

Transporting the unit

Storing the unit

Clean the unit (see chapter "Cleaning and servic-

ing the unit").

Dry the unit.

Pack the unit, preferably in the original packag-

ing.

Store the unit in a dry, cool place.

Disposing of the unit

Pass the outdated unit onto a specialized retailer

for professional disposal. Observe the applicable

national specifications when disposing of the unit.

You can find out about further disposal possibilities

from your municipality.

Spare parts and accessories

You can purchase spare parts and accessories from

specialized retailers and replace them on the unit

yourself. Only original parts from the manufacturer

can be used. Repairs can only be carried out by pro-

fessionals. This also applies to a faulty power cord.

Accessories Designation

Evaporator wick A7018

Ionic Silver Stick

®

A7017

Decalcification agent A7417

Frequently asked questions

Q. Why is the air moisture too low in my room?

A. How often do you use the unit? If the unit is only

in operation at night, the air moisture decreases

during the day as moisture is not being added to

the air constantly.

Wood, leather, carpeting, curtains and other

materials absorb a lot of moisture, resulting in

a decrease in air moisture.

If the window is open, moisture can escape

from the room.

A common reason is that the unit is placed next

to a heater in order to disperse the moisture

quickly throughout the room with the hot air.

However, this does not work. The escaping hot

air absorbs the majority of the moisture before

reaching the room air at all.

Q. Should I leave my door open or closed while

the unit is in operation?

A. With an open door, the moisture escapes the

room and disperses itself in other areas of the

house. If you want to increase the air moisture

in a certain room, you should make sure that

the door to that room remains closed while the

unit is in operation.

Q. How high should the air moisture be in my

room?

A. Air moisture of 40–60% is recommended.

1.

2.

3.

4.

Disposing of the unit

Spare parts and accessories

Frequently asked questions

Q. What are the consequences of too low or too

high air moisture?

A. Dry air can lead to dry skin, electrostatic charg-

es, out of tune musical instruments, increased

dust development, damage to wooden items

(drying out and cracking), illness, disease and

drying out the nasal mucous membranes. Too

high air moisture can result in mold develop-

ment and wall paper falling off.

Q. Why do I need an Evaporator if I could also

simply open the window?

A. The air moisture in the outside air is not high

enough to moisturize a room.

Q. Where should I place my Evaporator?

A. The unit should be placed in the middle of the

room and not at a wall, a window, a door or

a thermal bridge so that the air can circulate

freely around the unit.

Q. Is it a problem if my unit runs dry?

A. If there is a possibility of the unit running dry,

e.g. when you cannot refill the water, switch the

unit off before leaving the room. Without water,

the unit cannot moisturize the air, which can

lead to an unpleasant odor.

Q. Can the unit be used through the entire

year?

A. Yes, you can use the unit the whole year. The

unit creates relative air moisture until the room

air is saturated. Thus the unit cannot make the

air "too moist".

Q. Can I clean the water base in the dishwash-

er?

A. No, you cannot clean the water base in the

dishwasher as it would otherwise melt.

Storing the unit

Air-O-Swiss E2441 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info