Bedienungsanleitung Airthings Corentium Pro (Seite 4 von 5) (Englisch)

807125

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

wish to conclude the radon test with no added photos

or comments, tap on the “Finalize Test” button at the

bottom of the screen. This will begin uploading the

dataset to the Dashboard. Once the dataset is uploaded,

you will be taken back to the main screen of the monitor.

Viewing a Dataset

To view the information of a dataset, rst nalize the

dataset as described in the above section. After the

dataset has been nalized, a button will appear titled

“View Dataset”. Tap this button to see the details of the

radon test including the measurement information, and

logged motion events if any occurred.

Note: Your mobile device must be connected to the

internet to view the dataset information.

Generating a Report in the App

To generate a radon report in the eld, locate the

correct dataset and tap on the “Generate Report”

button. The dataset must rst be nalized before

the Generate Report button will appear. Follow

the prompts to set various options for the nal

radon report. These options will vary based on the

information blocks that are included in the selected

report template. These options can include information

about motion events that occurred during the

measurement, selecting a dynamic paragraph option

(dynamic paragraphs are typically used to inform the

client of the recommended actions regarding the

overall radon average), and signing the report.

Note: Your mobile device must be connected to the

internet to generate a radon report.

Checking Monitor Details

To check details of the monitor, such as the rmware

version, date and time, calibration expiration date,

or status of a monitor, connect to it as described in

the section above. Once connected to the monitor,

tap on the “i” button near the serial number at the top

of the screen.

Other Operations

To log out of the app, from the home screen, tap on the

gear icon at the top right corner of the screen, then tap

on “Log Out”. You can also get help with the Corentium

Pro software system by tapping on the Help button.

The version number of the mobile app is located at the

bottom of this screen.

STATUS LIGHTS

• Flashing green once every 5 seconds: Normal

operation, monitor is recording data.

• Flashing green once per second: Radon test

scheduled, monitor in delay period.

• Flashing green, yellow, and red sequentially:

Monitor rebooting andperforming self-test.

• Flashing yellow: Indicates a warning but is still

operational. This usually means that the monitor

needs to synchronize the date, time, and time

zone. Connect to the monitor through the app to

synchronize the time.

• Flashing red: Error. Go to help.airthings.com/pro and

search for the keyword RED. If this does not solve

the issue, go back to the search bar and type Pro-

Technical Support Hours

•

Blue ash and beep: Bluetooth connection established.

• Blue ash (once): Bluetooth connection ended.

• Continuous blue: USB connected.

CRA PC Software

1. To download the software, go to help.airthings.com,

and type CRA in the search bar.

2. Refer to the Installation Guide and Software Manual

and open CRA PC Software

3. Connect the monitor to the PC via the USB cable.

Note: The CRA software is mainly used to remotely

troubleshoot a unit. It can may be used to create

report, but due to its complexity, we highly recommend

using only the Corentium Pro App and Pro Dashboard.

MORE INFORMATION

For more information and help, go to

help.airthings.com/pro where you will nd many

helpful articles, FAQs, QA/QC, instruction guides and

videos. We hope you enjoy using your new Airthings

Corentium Pro radon monitor.

Compliance

The monitor and the batteries must not be disposed

of as ordinary household waste. The materials used in

Corentium Pro can be recycled.

It is the user’s environmental responsibility to ensure

that electronic equipment and batteries

are disposed of in accordance with national

regulations. Users should contact the seller or their

local authority for information about environmentally

friendly waste disposal.

In the event of incorrect use or operation of the

monitor, Airthings AS cannot be held responsible for

any losses resulting from failure or from the loss of

measurement data.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

This equipment has been tested and found

to comply with the limits for Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residual installation. This

equipment generates uses and can radiate frequency

energy and, if not installed and used in accordance

with the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does harmful interference

to radio or television re- ception, which can be

determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and

receiver

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected

• Consult the dealer or an experienced radio/ TV

technician for help

ICES-003 Class B Notice

This Class B digital apparatus complies with Canadian

ICES-003.

Avis NMB-003, Classe B

Cet appareil numérique de la classe B est confor- me à

la norme NMB-003 du Canada.

Corentium® is a registered trademark of Airthings AS.

The Bluetooth® word mark and logos are regis- tered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by Airthings is under license.

Airthings AS, Oslo, Norway. v2

Airthings Corentium Pro Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info