Bedienungsanleitung Airtronics RD6000super (Seite 23 von 75) (Englisch)

28962

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

As an example, to set Exponential for elevator, access “EL” in the Channel area by using the (CH+) key.

Now press the FUNCTION down key to select the EXP display for the Elevator Channel as shown below.

This screen tells you the present Exponential status of the elevator channel and when a Dual Rate Exponential switch

is set to ON position, the Exponential setting for that control function. The possibilble range for Exponential settings is

from -100% to +100%. Note that 0% is linear. A negative value will speed up the response and it will make the stick

movement more sensitive around the neutral position.

To set an EXponential rate in this example, turn the Dual Rate switch for Elevator to the ON upward position. Note

that the display changed to Exponential #2. You can set the value for the Elevator channel Exponential. Press the

INC+/Yes key to set a positive value of Exponential function as indicated below.

In the above example we set Exponential #2 to be 20% of the maximum for the Elevator channel. This is a good

starting point for determining the suitability of Exponential throw for you aircraft and flying style.

You can actually have two different Exponential setting’s if you desired. One for switch position #1 and another for

switch position #2. However when you first start using Exponential throw, it is usually best to leave the switch #1

position at 0% which is linear throw.

In general, large amounts of Exponential are useful only in instances where very large control surface deflection is

required at extreme throw, while very small amounts of control response are necessary for smaller control stick

inputs. One example of models for which large Exponential settings may be useful is the highly maneuverable

“Competition FUN FLY” style models. For most sport and aerobatic models, an Exponential setting from +10% to

+25% will give the desired “softness” around neutral.

CAUTION: Proceed with care when setting Exponential functions to ensure that you will have adequate control

deflection available in any possible switch position. Setting Exponential to a very high or 100% setting will require

very large stick movements to achieve small control responses. Always make sure that you are aware of the present

status of any rate assignments that you have selected! For the most flexibility in setting up an aircraft model to your

liking, study the available options for Dual Rates, End Point Adjustments, and Exponential. The combinations

possible when using these options allows for several possible set-ups. The Exponential for the Aileron Channel is set

in the same manner as done for the Elevator. The AI D/R switch located above the right stick assembly is then used

when setting the Exponential Throw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Airtronics RD6000super Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info