Bedienungsanleitung Aiwa NSX-A10 (Seite 9 von 44) (Englisch, Französisch, Spanisch)

496477

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PROGRAMMED PLAY BASIC RECORDING

Up to 30 tracks can be programmed from any of the inserted

discs,

Use the remote control

c)>

....__

Press the PRGM button while pressing the SHIFT

button in stop mode.

PGM is displayed.

Press one of the DISC DIRECT PLAY buttons to

select a disc.

The selected disc is indicated in red on the display.

Go to the next step when the tray stops rotating.

Press the numeric buttons and the +1 O button to

program a track.

Example:

To select the 25th track, press the +1O,+10 and 5 buttons.

To select the 10th track, press the +1Oand Obuttons.

Total playing time of

Program number

the selected tracks

Selected track number

Total number of

selected tracks

4 Repeat steps 2 and 3 to program other tracks.

5 Press the M PRESET button to start play.

To check the program

Each time the < or * buttorf is pressed in stop mode, a

disc number, track number, and program number will be

displayed.

To clear the program

Press the

■ CLEAR button in stop mode.

To add tracks to the program

Before playing, repeat steps 2 and 3. The track will be

programmed after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

● During the programmed play, the EDIT/CHECK, DISC

CHANGE. DISC DIRECT PLAY and numeric buttons do not

function.

● RANDOM play is not performed during programmed play,

Preparation

● Wind up the tape to the point recording starts.

● Note that recording is done on only one side of the tape,

● Use only normal (type I) tapes.

Insert the tape to be recorded on into deck 1 and

push the cassette holder to close it.

Get ready for the source to be recorded.

To record from a CD

Press the CD button and load a disc.

To record from a tape

Press the TAPE button. Then, insert the original tape into deck

2 and play it.

To record from a radio broadcast

Press the TUNER/BAND button and tune in to a station.

To record from the connected source

Press the VIDEO/AUX button and play it.

Press the @ button to start recording.

The > button is depressed simultaneously.

When recordina from a CD, playing and recording start

simultaneously from the first track.

To stop recording

Press the W= button on deck 1.

To pause recording

Press the 11 button on dqck 1.

To resume recording, press it again.

To record selected tracks of the CD

Before pressing the

● button, program the tracks,

To start recording precisely (except when recording from

a CD)

Before pressing the

● button at step 3, press the 11 button on

deck 1. Then, press the

● button. The deck enters recording

pause mode. When you wish to start recording, press the II

button again.

To record part of the CD

When the

● button is pressed, recording always starts from the

first track. To start in the middle of a track, play the CD first and

press the II button for

CD at the point you wish to start recording

from. Then, press the

● button. The pause mode for CD button

is released automatically and recording starts.

Do not press the buttons on deck 2 during recording.

ENGLISH 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-A10 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info