Bedienungsanleitung Aiwa NSX-A10 (Seite 11 von 44) (Englisch, Französisch, Spanisch)

496477

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PROGRAMMED EDIT

RECORDING

Repeat step 5 for the rest of the tracks for side

A track whose playing time is longer than the remaining time

cannot be programmed.

Press the EDIT/CHECK button

while pressing the

SHIFT button to select side B and program the

tracks for side “B.

After confirming Bon the display, repeat step 5.

The Programmed edit function enables CD recording while

checking the remaining time on each side of the tape as the

tracks are programmed.

Press the ED[T/CHECK button while pressing the

SHIFT button to select side A and press the Q

button on deck 1 to start recording.

CD play and recording of edited tracks for the first side start

simultaneously. When the end of the tape is reached, deck

4,5

1 enters the recording stop mode. After entering the recording

stop mode, go to step 9.

Press the EDIT/CHECK while pressing the SHIFT

3,7,8,9

8.10

button on the remote control for recording off

the second side.

After confirming Bon the display, go to step 10,

10 Turn over the tape in deck 1 and press the @

button,

Recording starts.

1 Insert the tape into deck 1.

Insert the tape with the side to be recorded first facing out

from the unit. Press the TAPE button, and wind up the tape

with the < button.

Press the CD button on the main unit and load

the disc (s).

Press the EDIT/CHECK button twice while

pressing the SHIPT button on the remote control.

PRGM is displayed.

To stop recording

Press the WA button on deck 1. Recording and CD play stop

simultaneously.

To check the order of the programmed track numbers

Before recording, press the EDIT/CHECK button while pressing

the SHIFT button to select side A or B, and press the K DOWN

or W UP button repeatedly.

Program

Disc

Programmed track

number numbers

number ,

Press the numeric buttons on the remote control

to designate the tape length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape, press the 6 and O

buttons.

Maximum recording

time for side ATape length

Tape side

Track number

To change the program of each side

Press the EDIT/CHECK button while pressing the SHIFT button

to select side A or B, and press the

■ CLEAR button to clear

the program of the selected side, Then program tracks again.

Tape si;e A (front side)

Press one of the DISC DIRECT PLAY buttons to

select a disc and press the numeric buttons to

program a track.

Example: To select the 10th track of disc 2, press DISC

DIRECT PLAY 2 and the numeric buttons +10 and O.

To clear the edit program

Press the

■ CLEAR button twice in the stop mode so that the

red line surrounding Al EDIT on the display goes out,

“ The edit function cannot be used with discs containing 31 tri~cks

or more.

● Recording is inhibited if the erasure prevention tab on either

side of the tape is broken off.

Total number of

programmed tracks

To erase a recording

A previous recording is erased when a new recording is made

on that part of that tape.

Insert the tape you want to erase into deck 1.

Press the TAPE button.

Wind up the tape to the point where the erasure is tc] be

started.

Press the

● button on deck 1 to start erasure.

ENGLISH 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-A10 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info