Bedienungsanleitung Aiwa NSX-MT725 (Seite 23 von 104) (Englisch, Französisch, Spanisch)

496582

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

This section explains how to record from the tuner, CD player, or

external equipment.

;

●/0 REC/

REC MUTE

bl+ F

Preparation

● Use Type I (normal) and Type II (high/CrOz) tapes for recording.

● Set the tape to the point where recording will start.

Insert the tape to be recorded on into deck 2.

Insert the tape with the side to be recorded on first facing out

from the unit.

A PUSH

EJECT

Press REV MODE to select the reverse mode.

To record on one side only, select 1.

To record on both sides, select Z) or C=).

Press function (TUNER/BAND, VIDEO/AUX, CD or

MD) and prepare the source to be recorded.

To record from a CD, press CD and load the disc(s).

To record from a radio broadcast, press TUNER/BAND and

tune in to a station.

To record from a connected source, press VIDEO/AUX or

MD.

Press ● REC/REC MUTE to start recording.

When recording from a connected source, start playback of

When the selected function is CD, playback and recording

start simultaneously.

To stop recording, press H.

To pause recording, press 11. (Applicable when the source is

TUNER, VI DEO/AUX or MD) To resume recording, press it again.

To start recording with the remote control

First press

●\O REC/REC MUTE, and then press ➤/+ ➤ within

2 seconds.

Sound adjustment during recording

The VOLUME control has no effect on recording. It only sets the

level feeding the speakers and headphones. Remember, however,

recording takes on the BEAT, AUTO SPICE/FILL IN, SPICE A/B

functions, as well as on the BBE function.

Insertion of 4-second blank spaces enables you to activate the

Music Sensor function. (Applicable when the source is TUNER/

BAND, VIDEO/AUX or MD.)

1 Press

● REC/REC MUTE during recording or while in

recording pause mode.

~ on the display flashes for 4 seconds and 4-second blank

space is made. Then, the deck enters the recording pause

mode.

2 Press 11 to resume recording.

To insert a blank space of less than 4 seconds, press

●

REC/REC MUTE again while ~ is flashing.

To insert blank spaces of more than 4 seconds, after the deck

enters recording pause mode, press

● REC/REC MUTE again.

Each time the button is pressed, a 4-second blank space is added.

“Can’t REC” is displayed if you attempt to record on a tape with

the plastic tabs broken off.

To erase a recording

Make sure the microphone is not connected to this unit. Set the

microphone volume and the echo level to OFF (see page 28).

Also, check to make sure that BEAT and AUTO SPICE are

switched off (page 11).

Insert the’”ta~e to ‘be erased into deck 2 and press TAPEI

DECK 1/2 to display “TP 2“.

Set the tape to the point where the erasure is to be started.

Set the reverse mode by pressing REV MODE.

Press

● REC/REC MUTE to start the erasure.

22 ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-MT725 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info