Bedienungsanleitung Aiwa NSX-MT725 (Seite 24 von 104) (Englisch, Französisch, Spanisch)

496582

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

CDEDITI

CHECK

The Al edit recording function enables CD recording without

worrying about tape length and track length. When a CD is

inserted, the unit automatically calculates the total track length.

If necessary, the order of tracks is rearranged so that no track is

cut short.

(Al: Artificial Intelligence)

Al edit recording will not start from a point halfway into the tape.

The tape must be recorded from the beginning of either side.

Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out

from the unit.

Press CD and load the disc(s).

Press CD EDIT/CHECK u.

“EDIT” is displayed.

EDIT

● When “PRGM” is displayed, press CD EDIT/CHECK.

Press DISC DIRECT PLAY 1-3 to select a disc.

Press numbered buttons O-9 on the remote

control to designate the tape length.

to 99 minutes can be specified.

Example: When using a 60-minute tape, press 6 and O.

[n a few seconds, the tracks to be recorded on each side of

the tape are determined.

● +, - or MULTI JOG are also available to designate

6 Press . REC/REC MUTE to start recording on

the first side.

The tape is rewound to the beginning of the front side, the

lead segment is played through for 10 seconds, and recording

starts. When recording on the front (side A) ends, recording

on the back (side B) starts.

the tape length.

Tape length

Remaining time Programmed

of recording

tracks for side A

To stop recording

Press ■ . Recording and CD play stop simultaneously.

To clear the

edit program

Press ■ CLEAR twice so that “EDIT” disappears on the display.

To check the order of the programmed track numbers

Before recording, press CD EDIT/CHECK to select side A or B,

and press + or - repeatedly.

Programmed

Track number track numbers

Tape side Program number

add tracks from other discs to the edit program

If there is any time remaining on the tape after step 5, you can

add tracks from other discs in the CD compartment .

1 Press CD EDIT/CHECK to select side A or B.

2 Press DISC DIRECT PLAY 1-3 to select a disc.

3 Press numbered buttons on the remote control to select tracks.

A track whose playing time is longer than the remaining time

cannot be programmed.

4 Repeat steps 2 and 3 to add more tracks.

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than

the specified recording time printed on the label. This unit can

program tracks to use the extra time. When the total recording

time is a little longer than the tape’s specified recording time

after editing, the display shows the extra time (without a minus

mark), instead of the time remaining on the tape (with the minus

mark).

● The Al edit’ recording function cannot be used with discs

containing 31 tracks or more. “TR OVER” is displayed if this is

attempted.

● Recording is inhibited if the erasure prevention tab on either

side of the tape is broken off.

Tape side

A: First recording side

B: Second recording side

24 ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-MT725 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info