Bedienungsanleitung Aiwa NSX-V8000 (Seite 8 von 76) (Englisch, Französisch, Spanisch)

496600

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

FRONT SURROUND SYSTEM

MANUAL TUNING

—___ ._

_ ..——----

-.———__ ___

__. _——.—

The front surround system uses a DSP (Digital Signal Processor)

to enhance the simulated surround sound effect for your listening

pleasure. When you select the FRONT SURROUND mode, the

sound presence of a disco (DISCO), live music performance

(LIVE), or concert hall (HALL) can be obtained.

In addition, the front surround speakers are located inside the

cabinet of your speaker system and are directed inward to provide

an effective simulated surround sound effect without having to

connect optional surround speakers.

Press the FRONT SURROUND button repeatedly until the

desired FRONT SURROUND mode is displayed.

Equalization curves are selected automatically to match the

FRONT SURROUND modes and can also be selected or turned

off to suit your preference.

When the music source is monaural

Select LIVE to obtain a simulated stereo effect. When DISCO or

HALL is selected, no sound will be heard from the surround

speakers.

To cancel the selected mode

Press the selected button again. S-OFF is displayed.

While FRONT SURROUND mode is off, no sound is heard from

the surround speakers.

When a connected microphone is used, the FRONT SURROUND

system is automatically canceled.

\——.——

_._. —.—. —,

REPEATI

MONO

TUNER

Press the TUNER/BAND button repeatedly to

select the desired band.

If the power is turned off, the previously tuned station will be

played (Direct Play Function).

Press the 144 DOWN or WI UP button to select

a station.

Each time the button is pressed, the frequency changes.

When a station is received, “TUNE” is displayed for 2 seconds.

During FM stereo reception, (1(0)1) is displayed.

To search for a station quickly (Auto Search)

Keep the l<< DOWN or

➤>1 UP button pressed until the tuner

starts searching for a station. After tuning in to a station, the

search stops.

To stop the Auto Search manually, press the 1<< DOWN or P>l

UP button.

● The Auto Search may not stop at stations with very weak

signals.

When an FM stereo broadcast contains noise

Press the REPEAT/MONO TUNER button on the remote control

so that “MONO” appears on the display.

Noise is reduced, although reception is monaural.

To restore stereo reception, press the button

disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is

so that MONO

10 kHz/step. If

you use this unit inan area where the-frequency allocation system

is 9 kHz/step, change the tuning interval.

Press the POWER button while pressing the TUNER/BAND

button.

To reset the interval, repeat this procedure.

When the AM tuning interval is changed, all preset stations (see

“PRESETTING STATIONS”) are cleared. The preset stations

have to be set again.

7 ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa NSX-V8000 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info