Bedienungsanleitung Akai MPC2500 (Seite 96 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

86 Chapter 13: PROGRAM

Simulating the open/close hi-

hat (setting the mute group)

Normally, when you hit a pad when another pad is played

back, the samples of these two pads will be played back over-

lapped. With the mute group function, you can stop the play-

back of the sample of a pad when you hit another pad. You

can simulate the open/close hi-hat; the sound of the open

hi-hat will stop when the close hi-hat sound is triggered.

You can use this function by setting two pads to the

same mute group. The pads set to the same mute group

will not be played at the same time.

01.

In the PROGRAM mode, press the [F3] (PARAMS) key.

The PARAMS page will be displayed.

02. Select one of the pads to set the mute group, by

hitting the pad.

03. In the Mute group field, select a number.

You can set any number except OFF.

04. Select the other pad to set the mute group, by hitting

the pad.

05. In the Mute group field, set the same number you set

for the first pad in the step 3.

You must set the same number to activate the mute

group.

Hit one pad while playing back another. The first

sample will be stopped and only the sample of the

pad you hit will by played.

Tips : You can set the mute group to more than two pads.

Note :

If you set the Play field to MONO, each pad sample cannot

be played with Polyphony, regardless of which mute group you

assign it to. When you use a mute group, set the Play field to POLY.

Setting the overlap of the

sounds on the same pad

(voice overlap)

Normally, when you hit the same pad several times, the same

sound will be overlapped. When you use the MPC2500 as a

drum machine, you can make the performance sound natu-

ral with this feature. However, when you are using a phrase

sample, it may be better not to overlap the same sound. With

the voice overlap function, you can set the MPC2500 not to

overlap the same pad sound.

01.

In the PROGRAM mode, press the [F3] (PARAMS) key.

The PARAMS page will be displayed.

02. Select the desired pad by hitting it.

03. In the Voice overlap field, select MONO.

POLY The MPC2500 overlaps the sound.

MONO The MPC2500 does not overlap the sound.

If you select MONO, when you hit the pad several

times, only the pad that was hit last will be played.

Note :

If you set the Play field to MONO, each pad sample cannot

be played with Polyphony, regardless of the Voice overlap setting.

When you use the voice overlap function, set the Play field to POLY.

Mute Target feature

You can use the Mute Target feature for stopping the

playback of the sample of a pad when you hit another

pad, except using the mute group.

If you use the Mute group, the playback of the pads in

the same mute group are stopped.

But if you use the Mute Target, it allows you to set “to

stop the pad A02 when hitting the pad A01, but not to

stop the pad A01 when hitting the pad A02”.

For example, in the Mute target field in the pad A01,

select the pad A02, and in the Mute target group in the

pad A02, not select the pad A01. In this case, the play-

back of the pad A02 will be stopped by hitting the pad

A01, but the playback of the pad A01 will not be

stoppped by hitting the pad A02.

You can set the maximum four mute tagret pads.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info