Bedienungsanleitung Al-ko JET 4000 (Seite 14 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

601990

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Instructions for use

14 JET 4000 / JET 5000 / JET 6000

Inox stainless steel

Units marked with the designation "INOX" are

supplied in stainless steel. The structure and func-

tion are unaffected by this.

Designated use

The garden pump is intended for private use in

house and garden. It must only be used in the

framework of the deployment limitations in accor-

dance with the technical data.

The garden pump is suitable for:

Watering and irrigating

Re-pumping and pumping out of vessels (e.g.

swimming pools)

Water extraction from streams, rainwater

butts and cisterns.

The garden pump is is suited exclusively for the

conveying of the following fluids:

Clear water, rainwater

water containing chlorine (e.g. swimming

pools)

Any other use shall be regarded as misuse.

Possible misuse

The garden pump must not be used continuously.

They are not suitable for conveying:

Drinking water

Salt water

Waste water

Foodstuffs

aggressive media, chemicals

corrosive, flammable, explosive or fuming

fluids

Fluids that are hotter than 35 °C

water containing sand and abrasive fluids.

SAFETY INSTRUCTIONS

CAUTION!

Danger of injury!

Only use the machine and the extension

cable if it is in perfect technical condition!

Damaged units must not be used.

Safety and protective devices must not

be deactivated!

Children, or people who are not familiar with

the operating instructions, are not allowed to

use the machine.

Never lift, transport or suspend the unit using

the connection cable.

Unilateral modifications or conversions of the

unit are prohibited.

Electrical safety

CAUTION!

Danger when touching voltage con-

ducting parts!

Disconnect the plug from the mains if the

extension cable is damaged or severed!

We recommend connecting a RCD (re-

sidual current operated device) having a

nominal residual current of < 30 mA.

The house mains voltage must agree with the

details quoted in the technical data, do not

use any other supply voltage.

The unit must only be operated with an

electrical installation in accordance with DIN/

VDE 0100, Part 737, 738 and 702 (swimming

pools). Protection must be provided by a 10 A

line protection switch and a RCCD (residual

current operated device) having a nominal re-

sidual current of 10/30 mA.

Use only extension cables that are suitable

for use outdoors - minimum cross-section 1.5

. Cable drums should always be unrolled

completely.

Damaged or brittle extension cables must not

be used.

➯

Check the condition of your extension

cable each time you start to use the

equipment.

ASSEMBLY

Setting up the equipment

1. Prepare a flat and solid location.

2. Erect the unit horizontally and safe from the

risk of flooding.

➯

The unit must be protected from the rain

and direct water jets.

Mounting the pressure line

1. Screw the connecting nipple (Fig. B -15) with

the round seal ring (Fig. B -16) into the pump

outlet (Fig. A -3).

2. Screw the elbow nipple (Fig. B -13) with seal

ring (Fig. B -14) onto the connecting nipple

(Fig. B -15) and turn the elbow nipple in the

desired direction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko JET 4000 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info