Bedienungsanleitung Alber e-fix E35 (Seite 71 von 98) (Deutsch, Englisch)

785798

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

4.7 General information on charging the battery pack

•Do not charge the battery pack in the presence or vicinity of flammable liquids or gases.

•In the (unlikely) event of the battery pack overheating or catching on fire, you must ensure that the battery does not come into con-

tact with water or other liquids. The only suitable extinguishing agent that is recommended by the battery manufacturers is sand.

•Do not carry out the charging process in rooms where moisture may affect the battery pack.

•Carry out the charging process with the wheelchair in a space at least twice its volume, with sufficient ventilation that there is no haz-

ard due to build-up of flammable gas.

•Explosive gases can be generated while charging. Keep away the wheelchair and battery charger from sources of ignition, such as flames

and sparks.

•Never charge the battery pack at temperatures below 0°C or above 40°C. If you attempt a charging process outside of this temperature

range, the charging process will be automatically aborted.

4.8 Safety instructions for the battery charger and the charging process

•Switch off the system before starting the charging process. If the battery pack is being charged directly on the wheelchair, the wheel-

chair should be secured using its parking brakes to prevent it inadvertently rolling away.

•Only use the charger included by Alber to charge the battery pack. The charging process ends automatically when the battery pack is

fully charged. This avoids overcharging.

•Do not use any other charger than the one supplied by Alber.

•Do not charge any other batteries with the charger; only charge the e-fix battery pack.

•If the e-fix is not going to be used for an extended period (more than one day), the battery pack should not be left on the e-fix. Dis-

connect the charger from the mains socket first before disconnecting it from the battery pack.

•Do not expose the charger to moisture of any kind during charging (water, rain water, snow, etc.).

•Be aware of condensation. If the charger is brought from a cold into a warm room, condensation may occur on and in the device. In this

case, refrain from using the charger until all condensation has dissipated. Please note that this may take several hours.

•Do not carry out the charging process in rooms where moisture may affect the charger.

•Never carry the charger by its power cable or the charger cables.

•Never tug at the power cable to disconnect the charger from the mains socket.

•Lay the mains cable and charging cable so that no-one can tread on it or trip over it. Do not expose the two cables to any other harm-

ful influences or stresses.

•Do not operate the charger if the power cable, the charging cable or the plugs attached to the cables are damaged. Damaged parts must

be replaced immediately by a specialist dealer that has been authorised by Alber.

•Do not use or disassemble the charger if it has received a hard blow or was dropped or damaged in some other way. Take the damaged

charger to a specialist dealer that has been authorised by Alber to perform repairs.

•The charger must not be used by children.

•The charger is designed to operate only with mains alternating voltage of 100 V to 240 V.

•Never attempt to disassemble or modify the charger.

•Do not cover the charger during the charging process or place any objects on top of the device.

•Never subject cable and plug to any pressure. Overstretching or bending the cable, pinching cables between a wall and a window frame

or placing heavy objects on a cable or a plug may result in electric shock or fire.

•Never connect the two terminals of the charging cable to any metal objects.

•Ensure that the plug is firmly inserted in the socket.

•Do not touch the mains plug or the charging cable plug with wet hands.

•Do not use the plug of the charger and/or the mains plug if they are wet or dirty. Before inserting them, clean the plugs using a dry

cloth.

•Once the charging process is complete, first disconnect the plug of the charger from the socket and then disconnect the charging plug

from the socket on the battery pack.

•Ensure that after disconnecting the charger, no moisture can get into the battery socket [29].

Before and after charging, ensure that the charger plug [33] and the sockets [29] on the battery pack are clean

and that there are no metallic particles. If you detect such particles, use a dry and clean cloth to remove them.

The charger plug is magnetic. Therefore prevent the plugs coming into contact with medical implants, electronic

storage media, bank cards or similar items.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber e-fix E35 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alber e-fix E35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info