Bedienungsanleitung Alber e-fix E35 (Seite 73 von 98) (Deutsch, Englisch)

785798

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

5. Control unit

Buttons and a joystick on the control unit enable you to activate and deactivate various

functions and settings. In this respect the diagrams of individual display screens shown

in the following operating instructions may differ from the actual displays of your control

unit.

An audible signal will also sound with various display screens, but only if this function

has been activated (see chapter 5.3.7).

5.1 Fitting and removing the control unit

A holder [65] has been fitted to your wheelchair to secure the control unit.

•Push the guide rail [62] fitted to the underside of the control unit [9] into the sliding

part [63].

•Secure the control unit [9] in the sliding part [63] using the locking lever [64].

•Insert the plug [23] of the control unit into the socket [29] of the battery pack. The

connection is locked automatically by a magnetic closure.

•The control unit is removed in the reverse sequence.

Before inserting the plug [23] in the socket [29] of the battery

pack, ensure that both parts are clean and there are no metallic

particles on them. If you detect such particles, use a dry and clean

cloth to remove them.

The control unit plug [23] is magnetic. Therefore prevent the plug

coming into contact with medical implants, electronic storage

media, bank cards or similar items.

5.2 Control unit functions

5.2.1 Switching on the system

If the two e-fix wheels have been correctly attached to your wheelchair as described in

chapter 2.1, you can now switch on the system using the control unit [9]. Do not touch

the joystick or controls of the control unit when switching the system on. If you do,

you will get an error message.

•Press the on/off button [19] briefly. The system is switched on and the Alber e-fix

start screen is shown in the display [18] for about 3 seconds. The user screen illus-

trated in the adjacent diagram then appears (see chapter 5.3.1 for the meaning of the

symbols).

(The left-hand illustration may vary from the actual display on your control unit

because functions may be activated or deactivated.)

•If you are not yet familiar with the e-fix and its driving characteristics you should

start by reducing the maximum speed to a minimum using the rotary switch [22] (see

chapter 5.2.6).

•Using the joystick [14] you can now start the two e-fix wheels moving. However, make

sure you have read the safety instructions and precautions in chapter 3.

•If the switched on wheels do not move, the system will automatically cut off after 10

minutes. For details, see chapter 5.5.

If, after switching the system on, you see an entirely different dis-

play to the one shown here, there is an error. Chapter 6 contains a

list of these with error codes.

The language selection menu only appears the first time you switch

on the control unit (see chapter 5.4). In this menu you can set

which language you wish the information in the display to be shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber e-fix E35 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alber e-fix E35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info