Bedienungsanleitung Alber e-motion mobility App (Seite 26 von 72) (Deutsch, Englisch, Holländisch, Französisch, Norwegisch)

785810

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Flight mode is now deactivated. However, the wheels

are still switched off. They can now be switched on by

pressing the button again.

- Preparing batteries for storage: If the e-motion is not

used for a long period of time, the batteries in the drive

wheels should neither be fully charged nor fully dis-

charged. The ideal charge level is approx. 65 %. This

guarantees an optimum service life of the stored e-mo-

tion batteries.

By pressing the corresponding START button, the

wheels are automatically discharged to this value with-

out any further action. This process can take several

hours, depending on the charge level of the batteries.

The remaining discharging time is displayed in the app.

You cannot continue to use the e-motion during the dis-

charging process. You can end the process at any time.

To do this, press the "Stop" button.

If the charge level is already lower than 65 % before the

start of the discharge function, the app will inform you

accordingly.

Mobility Plus Package functions

(subject to charge)

Cruise

The menu symbol takes you to the "Cruise" menu item.

With the cruise mode function, you can drive longer dis-

tances without needing to constantly use the push rims.

- Activating: Press the ON button corresponding to the

cruise mode to activate this mode

- The cruise mode is now activated automatically for all

speeds above 2 km/h and the speed is maintained auto-

matically. The e-motion also maintains the preset speed

on uphill and downhill slopes. A maximum gradient of 6

degrees (10.5 %) must not be exceeded with a maxi-

mum user weight of 150 kg (or system weight of 190

kg). The prerequisite is that the batteries are charged

to at least 10 %. This value is independent of the wheel

size of the e-motion used.

With a lower user or system weight, the cruise mode

can also be used on steeper routes. If you are not

sure whether driving on a slope with the cruise mode

activated is safe in an individual case, please contact the

Alber Service Center.

- To steer, hold one of the two push rims until the align-

ment has been corrected as desired.

- To accelerate, use the push rims again. Every push will

enhance the cruise speed by 0,5 km/h and is automati-

cally maintained once again.

- You have the option of using the and buttons in

the app to adjust the speed in increments of 0.1 km/h.

- To deactivate the cruise mode, push both push rims

strongly against the direction of travel (brake). The e-mo-

tion returns to the normal operating mode. A speed

of over 2 km/h automatically triggers the cruise mode

again.

- Switching off: Press the OFF button corresponding to

the cruise mode to completely switch off this mode

- If you have activated the cruise mode, this symbol

is displayed the header of the app.

4. ALL FUNCTIONS IN DETAIL

26 | Operating instructions e-motion M25 Mobility App

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber e-motion mobility App Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info