Bedienungsanleitung Alber e-motion mobility App (Seite 28 von 72) (Deutsch, Englisch, Holländisch, Französisch, Norwegisch)

785810

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Speed

The menu icon takes you to the Speed menu item. Here

you can choose between a maximum assisted speed of

6 km/h or 8.5 km/h.

- Press the ON button to set the maximum assisted

speed to 8.5 km/h

- Press the OFF button to set the maximum assisted

speed to 6 km/h

The maximum assisted speed is only ever reached in

assistance level 2, regardless of the selected travel prole.

Important Note: After activation of 8,5 km/h assist level

2 will be automatically activated. To switch between the

assist levels the ECS remote control or the ECS function

of the mobility app is required (subject to charge)

The maximum assistance speed may have been reduced

by your specialist medical dealer through programming.

In this case, it is no longer possible to set the maximum

assisted speed using this menu item. If in doubt, contact

your specialist medical dealer.

Observe country-specic trafc laws when increasing the

assistance speed from 6 km/h to 8.5 km/h.

4. ALL FUNCTIONS IN DETAIL

Remote

The menu icon takes you to the Remote menu item. Using

this function you can remotely control the e-motion, e.g. to

park your unoccupied wheelchair.

- Enter the 4-digit PIN code that you assigned the rst

time you paired your smartphone (see page 20).

- Use the corresponding buttons to select the type of

control: Motion offers the option of controlling the

e-motion by tilting the smartphone. The option Joystick

allows control via the virtual joystick shown in the app,

which you can operate with one nger.

- Use the slider below to select the speed for the remote

function. Sliding the controller to the right increases the

speed of the remote function. Sliding the controller to

the left decreases the speed.

- Start the remote function by pressing the Start button .

You can now control the e-motion remotely using the

virtual joystick or by tilting the smartphone.

- To exit the function, press the Stop button

Remote control of the wheelchair using the remote func-

tion is only permitted for unoccupied wheelchairs.

Watch out for obstacles in your immediate vicinity and

avoid collisions. Do not use the function in small spaces,

and only use it only indoors.

While the remote function is active, the maximum speed

is limited to 2 km/h for safety reasons, regardless of the

assistance level that has been set. The motor power is

limited to 10 % per wheel.

It is possible that heavy wheelchairs in conjunction with

high-pile carpets or ramps may not be able to operate the

remote function.

If the wheels are accidentally not tted correctly, the steering

directions forwards/backwards and left/right are reversed.

In this case, use the Swap wheels function (page 21) and, if

you have not already done so, attach the supplied "L" sticker

to the left wheel and "R" sticker to the right wheel.

If you have forgotten or lost the PIN code, a new pairing

is required (see page 20).

28 | Operating instructions e-motion M25 Mobility App

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber e-motion mobility App Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info