10
9
INTERCOM FUNCTION
{BETWEEN REMOTE/ MOBILE UNIT AND BASE UNIT}
A : Remote / Mobile CALLING BASE UNIT
Remote / Mobile
1. Press INTERCOM. The base will emit
two short “beeps”.
The Remote/Mobile unit INT indicator
will begin to flash.
2. The Remote/Mobile will then emit two
short rings and then it will continuous-
ly ring.
Once the Base unit is in use, the INT
indicator will continuously illuminate.
3. Pick-up the Normal Telephone and you
will be automatically linked with the
Base Unit for intercom communication
purposes.
4. Once you are finished your conversa-
tion, just hang up the handset and you
will automatically close the intercom
communication.
Note :
"
If you press INTERCOM without picking up the handset of the nor-
mal telephone and the Base unit user picks up their handset, the
Remote/Mobile unit will emit a quick beeping sound.
Base Unit
1. The Base Unit will ring, wait a few
ring and pickup the normal phone and
begin to talk, when you are finished
handup.
B : BASE CALLING REMOTE / MOBILE UNIT
Base Unit
1. Press the Intercom button on the Base
Unit and wait for somebody at the
remote end to answer.
2. When the somebody answers from the
remote end, communication is auto-
matically established and you can
begin your conversation. Just talk near
the Base Unit since the microphone is
located on the front panel.
3. To finish your intercom conversation, it
is necessary that the Remote/Mobile
Unit hangs up. The Base Unit cannot
hang up during intercom.
4. Pressing the Intercom button twice on
the Base Unit cancels the intercom
function.
5. If you have more than one
Remote/Mobile Unit in your network,
press the Select button to choose
which Remote/Mobile you wish to link
with. Press the Select button to move
from Remote/Mobile 1, 2, 3, or 4.
Once you have selected the
Remote/Mobile, press the Int button
and only this unit will ring. Use the
same procedures to communicate with
this unit.
