Bedienungsanleitung Alecto BW-600 (Seite 28 von 46) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

803285

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Defrost/milk warming:

1. Always place the basket into the bottle warmer rst before adding a bottle/jar. Do never place

the bottle/jar directly onto the heating element.

2. Fill the bottle warmer with water until the level of the milk in the bottle or the nutrition in the

jar. Regardless of the amount of milk/food, the water should not exceed the MAX level,

indicated in the inner rim. It is recommended to use distilled water, in connection with

possible scale formation.

3. Turn the knob to select the function. The power light is alternately on and off. The

frozen milk or food is ready after about half an hour/hour, depending on the type of food,

quantity and material in which it is heated. The nal temperature may also vary slightly due to

different milk or formula volumes and the material of the bottle or jar.

Note: It is normal that the indicator will alternately turn "on and off". The bottle warmer itself

will automatically adjust the temperature to ensure the heating milk/food evenly.

Note: To defrost completely, shake the bottle or stir the food from time to time.

Note: The milk/food after defrosting should not be fed immediately.

4. Note there is no timer on the BW600BK. So count the time yourself and remove the bottle/jar

from the bottle warmer after the indicated time has run out.

5. Gently shake the bottle or basket and check the temperature before you are feeding the

baby. Check the temperature by sprinkling a few drops on the inside of your wrist. Or taste of

feel the food when it's not too hot.

Tip: When you nd the milk/food is not warm enough, place the bottle/jar back into the basket

for maximum 0,5 min/1 min for extra warming. (Fill a small amount of water into the bottle

warmer when the water has dried out and then restart). This will cause a slightly warmer

result but without overheating.

Caution: If you leave the bottle/jar into the bottle warmer longer than one hour, the

milk/food may become overheated. Cool before feeding.

Note: If you use overheated breast milk or nutrition, valuable nutrients and vitamins may be

lost.

6. When the defrosting is completed, turn the knob to OFF.

Caution: The water in the bottle warmer may be hot after nishing the defrosting. Be

carefull the water can causes serious burns. If you do not turn the knob into to OFF

function, the water keeps heating up and will reach a very high temperature.

7. If the water has dried out, the reset switch will be triggered to shut off the power. Wait

10 minutes to cool down and then press the reset switch (until you hear a clicking sound)

restart the warming.

8. Before defrosting a second bottle or jar, it is best to wait 10 minutes for the bottle warmer to

cool to prevent overheating or pour cold water into the bottle warmer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto BW-600 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info