Bedienungsanleitung Alecto DBX-63 (Seite 49 von 56) (Deutsch, Englisch, Holländisch, Französisch)

707244

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

4.6 LULLABIES:

The DBX-62 is pre-programmed with 6 different lullabies and sounds that

you can set via the parent unit. After selecting your desired sound, it will be

played for up to 15 minutes.

1. briey press the button to activate the touch-screen

2. press and hold the button for 1 second to start

playback

3. you can use the and buttons to select a different

song or sound

• playback will stop automatically after 15 minutes or you

can repeat instructions 1 and 2 above to stop playback

earlier

• use the + and – buttons on the baby unit to adjust the

volume

• the sound of the lullabies can be heard at the parent unit through the

microphone of the baby unit; you can decrease the volume of the parent

unit if this bothers you

4.7 FEEDING TIMER:

The DBX-62 parent unit can emit a signal when it’s time for your baby to be

fed. First you must set how many hours are in between feeding times:

1. briey press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option

FEEDING TIME

4. briey press the M button

5. use the and buttons to select the time in

between feeding times in increments of half an hour

6. briey press the button to conrm your selection and to leave the

• you only have to set this time once, but you’ll need to adjust it again

when the time in between feeding times changes or when you prefer to

turn this function off (by selecting ‘off’ in the above step 5)

Switching on the timer.

You can turn on the feeding alarm on the parent unit as follows:

1. briey press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option START

TIMER

4. briey press the M button to start the timer and to

leave the menu

• the timer time you have set will now appear in the

display directly underneath the name ‘BABY’ (or the name you

programmed yourself) and will slowly count down

• at 0.00 the unit will emit beep tones for up to 20 seconds while the text

‘FEEDING TIME’ appears in the display

You can now also use the baby unit to turn on the alarm

for the next feeding time:

1. briey press the button on the baby unit to activate

the alarm for the next feeding time, the unit will emit 2

beep tones.

Attention: only when the baby unit is in communication with the

parent unit you can turn on the alarm for the next feeding time. If you

don’t hear 2 beep tones after pressing the button, the connection between

the baby unit and parent unit is lost. You can now speak into the baby unit to

make it transmit (the red light turns on) and press the button again or

you can activate the feeding time alarm via the parent unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DBX-63 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info