Bedienungsanleitung Alecto DBX-63 (Seite 52 von 56) (Deutsch, Englisch, Holländisch, Französisch)

707244

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

5.6 ALARM TONE:

You can set the unit to emit a clear alarm tone when temperature limits are

exceeded, when the battery is low or when the baby unit is out of range. You

can turn this function on or off as follows:

1. briey press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option ALARM

TONE

4. briey press the M button

5. use the and buttons to turn this function on (ON)

or off (OFF)

6. briey press the button to conrm you selection and to leave the

• will appear in the display when the alarm tone is switched off

• this setting only turns the alarm tone on or off; the alarm itself is not

changed

• when the alarm tone sounds, you can turn it off by briefly pressing the

button

• this does not turn off the feeding time alarm

5.7 VIBRATION FUNCTION:

If you’re carrying the parent unit with you in a noisy room (e.g. while vacuum

cleaning) or you don’t want sounds from the parent unit bothering other

people and you have set the volume to 0, you can switch on the vibration

function:

1. briey press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option

VIBRATION FUNCTION

4. briey press the M button

5. use the and buttons to turn this function on (ON)

or off (OFF)

6. briey press the button to conrm you selection and to leave the

• will appear in the display when the vibration function is switched on

6 EXPANSION

The DBX-62 is capable of registering up to 4 baby units. This way you

can monitor 4 babies and because you can assign an individual name to

each unit, you can directly determine which child is crying. Additionally,

for each baby unit you can set the talk-back function, feeding timer, room

temperature, lullabies and night light.

6.1 CODING SWITCH:

In the battery compartment you’ll find a coding switch with 4

positions corresponding with baby units 1, 2, 3 and 4. Make

sure to set an individual code for each baby unit.

6.2 REGISTERING:

Upon expanding, you must register (re-register) ALL baby units,

also the baby units that were already registered.

Preparation:

Both the parent unit and baby unit must be switched off (parent unit: briefly

press and hold the button until the display is completely blank, baby unit:

slide the power switch to the OFF position), but the power supply (adaptor

or batteries) must be connected).

1. press and hold the TALK button on the rear of the parent unit

2. now press and hold the button for approximately 3 seconds until the

parent unit turns on and P/PAIRING appears in the display with the P

ashing. Now release both buttons

3. press and hold the + button on the baby unit

4. now slide the power switch to the ON position, the red light will turn

on, and release the + button

5. briey press the button, the display of the parent unit will show

‘PAIRING BABY X (*) OK and you’ll hear 2 beep tones from the baby

unit you just registered

6. repeat instructions 3, 4 and 5 for the other baby units

7. nally, turn the parent unit and all baby units off and back on

8. the registration is now complete

*: X = 1-4, corresponding to the position of the coding switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DBX-63 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info