Bedienungsanleitung Alecto DBX-68 (Seite 42 von 52) (Deutsch, Englisch, Holländisch, Französisch)

707245

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4 USE

Don’t forget that this baby intercom is merely an extra piece of mind. The

device can never replace the physical and monitoring presence of a parent

or babysitter.

4.1 TOUCH-SCREEN OPERATION:

Both the parent unit and baby unit are operated using the touch-screen. To

prevent functions from being switched on/off by accident, the user function

of the touch-screen is disabled in standby mode. Briefly press the button

to enable the user function of the screens, indicated by the illumination of

the backlighting.

Keep in mind that certain buttons must be pressed briefly while others must

be pressed longer. Please refer to the instructions in this user manual.

4.2 TURNING ON/OFF:

Press and hold the button for 3 seconds to turn on the baby-

unit or parent-unit.

Press and hold the button again for 3 seconds to turn off the

baby-unit or parent-unit.

4.3 CONNECTION CHECK:

As soon as you switch on the parent-unit, it will start searching for the baby-

unit.

If the parent-unit still hasn’t located the baby-unit after 60 seconds (because

it’s still turned off or out of range), the display lighting will start flashing while

the text ‘OUT OF RANGE’ appears in the display.

4.4 TO LISTEN:

Parent unit reception volume:

1. briefly press the button to activate the touch-screen

2. press to increase the volume

3. press to decrease the volume

• the DBX-68 has 8 volume levels and ‘sound off’

• an ‘x’ will appear behind the speaker symbol

when the volume is switched off

• the set volume level will be

shown of the display

Visual sound indicator:

The display indicates whether the baby is crying or not as

follows:

baby sleeping

baby crying

4.5 NIGHT LIGHT:

The baby-unit is provided with a built-in night light.

The light has the following possibilities:

1. briefly press the button to activate the touch-screen

2. press and hold the button for 1 second

• appears in the display = night light on

• appears in the display = night light in automatic mode

(on when the baby is crying, off when the baby is quiet)

• no light in the display = night light off

4.6 LULLABIES:

The DBX-68 is pre-programmed with 6 different lullabies and sounds that

you can set via the parent unit. After selecting your desired sound, it will be

played for up to 15 minutes.

1. briefly press the button to activate the touch-screen

2. press and hold the button for 1 second to start

playback

3. you can use the and buttons to select a different

song or sound

• playback will stop automatically after 15 minutes, you

can repeat instructions 1 and 2 above to stop playback

earlier

• use the and buttons on the baby unit to adjust the

volume

• the sound of the lullabies can be heard at the parent unit through the

microphone of the baby unit; you can decrease the volume of the parent

unit if this bothers you

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DBX-68 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info