Bedienungsanleitung Alecto DBX-68 (Seite 43 von 52) (Deutsch, Englisch, Holländisch, Französisch)

707245

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4.7 FEEDING TIMER:

The DBX-68 parent unit can emit a signal when it’s time for your baby to be

fed. First you must set how many hours are in between feeding times:

1. briefly press the button to activate the touch-screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option

FEEDING TIME

4. briefly press the M button

5. use the and buttons to select the time

in between feeding times in increments of

half an hour

6. briefly press the button to confirm your selection

and to leave the menu

• you only have to set this time once, but you’ll need to adjust it again

when the time in between feeding times changes or when you prefer to

turn this function off (by selecting ‘off’ in the above step 5)

Switching on the timer.

Attention: when only one baby unit is registered on the parent unit,

you may switch on the feeding timer via both the parent unit and the

baby unit. When multiple baby units are registered on the parent unit, you

can only switch on the feeding timer via the baby unit.

turn on the feeding timer on parent unit: (only possible when just one baby

unit is registered on the parent unit)

1. briefly press the button to activate the touch-screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option START

TIMER

4. briefly press the M button to start the timer and to

leave the menu

• the timer time you have set will now appear in the

display directly underneath the name ‘BABY’ (or

the name you programmed yourself) and will slowly

count down

• at 0.00 the unit will emit beep tones for up to 20 seconds while the text

‘FEEDING TIME’ appears in the display

turn on the feeding timer on baby unit:

1. briefly press the button to activate the touch-screen

2. briefly press the button on the baby unit to activate the alarm for the

next feeding time, the unit will emit 2 beep tones.

Attention: only when the baby unit is in communication with the

parent unit you can turn on the alarm for the next feeding time. If

you don’t hear 2 beep tones after pressing the

button, the connection

between the baby unit and parent unit is lost. You can now speak into the

baby unit and press the

button again or you can activate the feeding time

alarm via the parent unit.

4.8 TALKING BACK TO THE BABY UNIT:

1. Press the TALK button on the parent unit to talk back

to the baby unit.

2. Press and hold the button while talking and release

the button to listen.

3. Adjust the volume of the baby unit with the and

buttons on the baby unit itself

4.9 BELT CLIP:

The units are provided with a belt clip. Use it to suspend the unit or to carry

it on your clothing.

You may remove the belt clip by somewhat bending and opening one of the

ends.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DBX-68 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info