Bedienungsanleitung Alecto DBX-68 (Seite 45 von 52) (Deutsch, Englisch, Holländisch, Französisch)

707245

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

5.4 TEMPERATURE ALARM:

The display of the parent unit shows the temperature transmitted by

the baby unit. You can assign a minimum or maximum temperature to

this function and have the unit sound an alarm when these values are

exceeded:

1. briefly press the button to activate the

touch-screen

2. press and hold the M button for 3 seconds to

open the menu

3. use the and buttons to select the option

TEMP ALARM

4. briefly press the M button

5. use the and buttons to select whether you

want to set or adjust the lower or the upper limit

6. briefly press the M button

7. use the and buttons to adjust the selected temperature limit and

briefly press the M button

8. repeat step 5-7 if you want to set the other temperature limit

9. briefly press the button to confirm the set temperature limits and to

leave the menu

• the upper limit can be set between -3°C and 50°C

• the lower limit can be set between -19°C and 3 degrees lower than the

upper limit

• select ‘‘OF” if you don’t want to set an upper or lower limit

• when the set temperature limit is exceeded, the temperature display will

start flashing while ‘TOO WARM’ or ‘TOO COLD’ is shown

• if the ALARM TONE function is activated, you’ll also hear short

notification tones

• don’t forget that the temperature display is only an indication, you’ll

have to take a tolerance of +/- 2°C into account

• at temperatures above 50°C and under -19°C, ‘- -‘ will appear in the

display

5.5 ALARM TONE:

You can set the unit to emit a clear alarm tone when temperature limits are

exceeded, when the battery is low or when the baby unit is out of range.

You can turn this function on or off as follows:

1. briefly press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option

ALARM TONE

4. briefly press the M button

5. use the and buttons to turn this function on

(ON) or off (OFF)

6. briefly press the button to confirm you selection and to leave

the menu

• will appear in the display when the alarm tone is switched off

• this setting only turns the alarm tone on or off; the alarm itself

is not changed

• when the alarm tone sounds, you can turn it off by briefly pressing

the button

5.6 VIBRATION FUNCTION:

In case of a little more background noise (e.g. noise while vacuum cleaning)

while there’s a chance that the sounds from the baby monitor cannot be

heard clearly, or in case the volume is switched off, you can enable the

vibration function:

1. briefly press the button to activate the

touch-screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option

VIBRATION FUNCTION

4. briefly press the M button

5. use the and buttons to turn this function on

(ON) or off (OFF)

6. briefly press the button to confirm you selection and to leave the menu

• will appear in the display when the vibration function is switched on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DBX-68 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info