Bedienungsanleitung Alecto DBX-68 (Seite 46 von 52) (Deutsch, Englisch, Holländisch, Französisch)

707245

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

5.7 ECO / FULL ECO;

ECO:

In the ECO mode, the baby-unit is switched off while the baby is sleeping.

However, in the background the baby-unit regularly checks the connection

between the parent unit and baby unit. You’ll be notied if the connection is

lost.

FULL ECO:

In the FULL ECO mode, the baby-unit is also switched off while the baby is

sleeping and even the connection check is disabled. This means absolutely

no radiation when the baby is sleeping.

The baby unit activates as soon as the baby wakes up and starts making

noises.

Attention: keep in mind that in the FULL ECO mode, there’s no link-

check and therefore no alert tone when the connection between the

parent unit and baby unit is lost.

To set the ULL ECO mode on or off:

1. briefly press the button OF THE BABY-UNIT to activate the touch-

screen

2. press and hold the M button for 3 seconds to open the menu

3. press the M button 2 times shortly

4. use the and button to switch between ON (FULL ECO activated)

and OFF (FULL ECO disabled)

5. briefly press the M button to confirm you selection and to leave the

To check the link in between:

In the ECO or FULL-ECO mode you may briey press the TALK button in the

meantime to enable the sound (provided the volume is not set to 0) for about

10 seconds.

6 EXPANSION/NAME ASSIGNMENT

The DBX-68 is capable of registering up to 4 baby units. This way you

can monitor 4 babies and because you can assign an individual name to

each unit, you can directly determine which child is crying. Additionally,

for each baby unit you can set the talk-back function, feeding timer, room

temperature, lullabies and night light.

6.1 TO REGISTER & ASSIGN A NAME:

Attention: only during registration a name can be assigned to the

baby unit. If the baby unit is already registered and you only need

to adjust or set the name, you’ll only be able to this this by following the

registration process again.

When you’re only expanding your setup, ALL baby units must be registered

(again), i.e. also the baby units that were previously registered. However,

the names of baby units previously registered will remain in the memory.

preparation:

1. switch off the parent unit and the/all baby unit(s) by briefly pressing and

holding the button until the display is completely empty

parent unit:

2. press and hold the TALK button on the rear of the parent unit

3. now press and hold the button for approximately 3 seconds until the

parent unit turns on and P/PAIRING appears in the display with the P

flashing. Now release both buttons

first baby unit:

4. press and hold the button until first the baby unit switches on after

approx. 3 seconds and then ‘P’ starts flashing in the display after

another 2 seconds or more, now release the button

5. use the and buttons to select the respective baby unit (select ‘baby-

1’ for the first baby unit, ‘BABY-2’ for the second unit, etc.) and press

6. use the and buttons to select the first letter of the name and press

the M button

7. repeat this for all of the following letters (‘space’ is located directly after

the ‘ABC’, followed by the numbers 1 through 9. The name may consist

of a maximum of 8 characters)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DBX-68 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info