Bedienungsanleitung Alecto WS-3300 (Seite 37 von 42) (Deutsch, Englisch, Holländisch, Französisch)

708524

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

5. CLOCK AND ALARM FUNCTION

5.1 Clock:

Introduction:

The WS-3300 is provided with a built-in DCF receiver which receives the DCF time signal from Frankfurt.

This signal ensures that the clock shows the time very accurately, provided a strong enough signal is being

received. The clock is synchronized with the station in Frankfurt each night at 3am.

Automatic:

Upon installing the batteries in the indoor unit, the weather station performs an automatic setup. After

approx. 3 minutes or quicker, the clock starts searching for the DCF radio signal for the time and date while

the antenna symbol 

correct time. In extreme cases, it can take over a day before the DCF time is shown.

Manually:

If the clock cannot receive the radio signal or cannot receive it well enough, you can set the clock manually

as follows:

1. press and hold the button “MODE/SET” (30) for 2 seconds, 12Hr or 24Hr will appear in the display

2. Use ▼ and ▲MODE/SET” (30) button

3. use the ▼ and ▲



 MODE/SET” (30) button

5. use the ▼ and ▲MODE/

SET” (30) button

6. use ▼ and ▲MODE/SET” (30) button

7. use ▼ and ▲MODE/SET” (30) button

8. use ▼ and ▲ to set the seconds to 0 (this allows you to have the clock run synchronously with your own

MODE/SET” (30) button

9. use ▼ and ▲MODE/SET” (30) button

10. use ▼ and ▲ MODE/SET” (30) button

11. use ▼ and ▲MODE/SET” (30) button

12. use the ▼ and ▲MODE/

SET” (30) button



The clock is now set manually.

When the DCF receiver is enabled and a strong signal is being received, the receiver will overwrite the clock

display (provided that RCC is set to “on”).

The symbol indicates the status of the DCF clock:

no symbol: the DCF receiver is disabled; the displayed time is provided by the internal clock of the

WS-3300

 

the displayed time is provided by the internal clock of the WS-3300

remains lit: the DCF receiver is enabled and is receiving the DCF signal;

the displayed time and date are provided by the DCF atomic clock in Frankfurt

5.2 ALARM CLOCK FUNCTION:

MODE/SET” (30) button until the alarm clock time appears. When the wake-up time

is displayed, press and hold the “MODE/SET” (30) button for 2 seconds to change the wake-up hours with

the ▼ and ▲ buttons. Press “MODE/SET” (30) again to change the wake-up minutes with the ▼ and ▲ but-

tons. Press the button “MODE/SET” (30) again to save the alarm time.

The weather station is provided with wake-up functions. The alarm clock is activated when the alarm clock

icon appears in the display. During the basic display, press the “ ” button to activate the alarm clock. The

icon appears in the display.

5.3 TO DISABLE THE ALARM SIGNAL:

As soon as an active wake-up time is reached, the weather station will sound an alarm signal.



From 10 to 20 seconds, the rhythm of the alarm signal becomes quicker.

From 20 to 30 seconds, the rhythm of the alarm signal becomes even quicker.

The alarm signal has the fastest rhythm after 30 seconds and stops automatically after 2 minutes.

After 24 hours the alarm signal, connected to the set wake-up time, will sound again.

You may stop the alarm beforehand by pressing the “SNOOZE/LIGHT” (36) button or a random button to



Alecto WS-3300 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info