29
2
Basic Operation
Setting the Tuning Step
The tuning step sets the increment/decrement of each click of the dial when
adjusting the frequency in VFO mode.
1
Switch to VFO mode by pressing the [V/P/M (MW)] key.
2
Press the [FUNC/ENTER] key.
"F" will appear on the display.
3
Press the [MONI(ST/SK)] key.
The currently selected tuning step will appear on the display.
The default setting is AUTO. ("AUto")
4
Select a tuning step by rotating the dial from the following:
5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100, or AUTO. (Unit: kHz)
5
Press the [FUNC/ENTER] key.
Setting is completed, the receiver returns to the VFO mode.
Tip
· AUTO is for selecting the suitable tuning step and modulation mode
automatically.
· When AUTO is selected, it is not possible to change the modulation mode.
