541356
42
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
41
MIDI DUMP DATA
When a MIDI DUMP OUT is performed the entire contents
of the console memory is transmitted down the selected
MIDI channel. This includes the current console mute
settings, mute groups, patches, safe settings, solo settings,
console modes, and console MIDI channel number. When
a MIDI DUMP IN is received the console memory is
completely overwritten.
This is ideal when you want to archive settings and recall
them at a later date, for example a re-run of a previous
performance. You can also use the dump facility to program
additional GL4000 consoles, for example when setting up
duplicate shows or swapping consoles around.
MIDI DUMP OUT
Press SHIFT + STORE
The dump is started down the selected console MIDI
channel. If MIDI has been disabled (channel = OFF)
then nothing will happen when dump is activated.
The display flashes dPo during the duration of the
dump (around 15 seconds).
While dump is in progress the mute group and patch
system is locked out. However, the channel mutes
may be operated in the normal way so that live
operation may continue unaffected.
MIDI DUMP IN
The console responds automatically to the System Exclusive
dump in message formatted as above.
While the console is receiving dump in data the
display flashes dPI (around 15 seconds).
While dump is in progress the mute group and patch
system is locked out. However, the channel mutes
may be operated in the normal way so that live
operation may continue unaffected.
On completion the console restores normal operation
with the new memory settings in place.
DUMP ERRORS
If the console or connected equipment fails to respond to a MIDI
dump then check that the MIDI is correctly enabled on each. Check
that the cables are correctly plugged. In the event of a data error
being detected during a MIDI dump out or in the display will show
an error message code. Refer to the section on TECHNICAL
SUPPORT for an explaination of these.
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Allen-Heath GL 4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info