541356
43
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
42
TECHNICAL SUPPORT
Should you have any queries about the GL4000 console automation system please
quote the console model, serial number and software version number in any
communication with Allen & Heath or appointed service agent. The system has been
designed and tested to be reliable under the harsh conditions typical of live sound 'on
the road'. Should a problem be encountered check first that external equipment is
correctly connected and functional (or disconnected to test the console itself), that the
equipment has been correctly set up, and that the mains power is correct for the
console power unit. Error detection systems have been built in to assist with problem
investigation.
POWER UP AND POWER DOWN
The console settings are remembered when power is
removed from the console. A power down circuit detects
falling voltage and writes the settings to non-volatile memory.
On power up these settings are restored. Mains power
fluctuations ('brown-outs') are detected with error code
readout.
CONSOLE DC POWER INDICATORS
The console power unit converts mains voltage to the DC
supply rails required by the console. Each rail has an
associated indicator LED on the front panel. If a power rail
fault is suspected check that these LEDs are correctly
illuminated. Note that the optional RPSD2 dual power supply
monitor includes further power supply status monitoring.
SOFTWARE VERSION NUMBER
Press SHIFT + PREVIEW GROUP
The software version number is shown on the patch
display. For example, 1.23 is version V1.23
Release the keys to return to normal display.
SOFT RESET
Should the system lock up and fail to clear itself first press
the underpanel RESET button above the rear panel MIDI
sockets. This restarts the processor as if the console was
powered off and then on, except that the console may not
reset to the last active mute settings.
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Allen-Heath GL 4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info