Bedienungsanleitung Allen-Heath iDR-8 (Seite 24 von 47) (Englisch)

541382

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

24 IDR-8 User Guide

Communicating Using a Dial Up Connection

A front and a rear RS232 connection is provided. You choose

which one to use by setting the front panel switch. Only one

can be active at any time, indicated by a green LED. The

RS232 port is selected as one of the communication options in

the iDR System Manager Preferences item.

The front panel connection is for updating the iDR unit

operating code via your PC COM port. You can also use it to

run iDR System Manager with the unit by setting up a PPP dial-

up connection. However, this is much slower than the

recommended TCP/IP connection.

The rear panel RS232 port is for connection to a modem. This

lets you communicate with the iDR-8 remotely over a standard

telephone line. You can also use it for direct connection to a

PC running iDR System Manager but, once again, this is much

slower than using the network port.

To use the RS232 port you need to access the front panel

menu system to set the PPP settings. You also need to have

RS232 selected as one of the communication options. This is

done using the iDR System Manager software.

Selecting RS232 Communication Option

First check that the RS232 port is active. Deselect the front

panel switch so that the rear RS232 port is selected. Now

check that the ‘active’ indicator next to the rear RS232

connector is lit. If it is not then you need to use the iDR System

Manager to make RS232 active. Note that doing this may

disable one of the other ports being used with the system.

 Using iDR System Manager Click on the File menu /

Preferences / Communications Options item. This opens up

the Select Communications Option window. You can select

from the displayed combinations which options are associated

with serial ports A and B. To use RS232 make sure one of the

top three is selected. Reboot the iDR-8 for the changes to take

effect.

Setting up a Dial-up Connection

You can simply use the factory default PPP settings. In that

case skip step 1 below. However, you can change these if you

have a reason to do so. Do this using the front panel menus.

1 Changing the iDR-8 PPP settings Go to menu *6 PPP

Settings. Under menu *6.1 set the host IP address. The iDR-8

is the host. Under menu *6.2 set the client IP address. The PC

is the client. The iDR-8 allocates the client address to the PC

during the PPP communication. The host and client addresses

must not be the same. Use menu *6.3 to set the Username,

and menu *6.4 to set the Password. Both can have up to 16

characters and are case sensitive. You need to reboot the unit

for the changes to take effect.

2 Setting up the PC dial-up connection You need

administrative rights to your PC. You must have a MODEM

installed for the COM port you wish to use. Under the Network

and Dial-up Connections menu select the ‘Make New

Connection’ option. Use the same Username and Password as

set up on the iDR-8. Name this connection for future use with

the unit. If you need further information on how to set up the

connection please refer to your Windows™ version Help file.

The default iDR-8 PPP settings are:

Host IP = 192.168.0.1

Client IP = 192.168.0.2

Username = iDR

Password = A&H

PC dial-up connection settings required:

Modem 56000 bps V90

Dial-up server = PPP

Internet Protocol TCP/IP

Same Username as iDR-8

Same Password as iDR-8

Use null-modem cable to connect to PC com port

active

RS232 (MODEM)

CODE UPDATE

RS232

DR-8

AUDIO MIX PROCESSOR

TELEPHONE LINE

MODEM

RS232

PPP

NORMAL RS232 CABLE

NULL MODEM RS232 CABLE

PPP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath iDR-8 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info