Bedienungsanleitung Allen-Heath MixWizard Series WZ20S (Seite 24 von 32) (Englisch)

541378

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

24 WZ20S User Guide

CONSOLE MONITOR SYSTEM The WZ20S provides

extensive console monitoring facilities to satisfy a wide range of

applications including broadcast and club mixing. Every signal can be

monitored individually or within any mix. Two systems are provided,

headphones and local monitor. Two sets of headphones may be

connected at the same time. The local monitor can be used to feed a

stereo booth, stage or studio speaker system. The PFL (Pre Fade

Listen) system lets you quickly check channel signals and correctly set

gain.

MONITOR / MIX2 METERS A pair of meter bars displays the level of

the selected monitor source or PFL. With all selector switches up

these default to display the post-fader left and right output levels of

stereo MIX2. When SPLIT PFL is selected the left meter displays the

active PFL signal, the right displays the switch bank source in mono.

Each meter has 12 LEDs to indicate signal levels from as low as –30dB.

Green and yellow LEDs indicate normal operating levels. The top red

LED lights at +16dB to warn that you are within 5dB of clipping. Meter

‘0’ represents +4dBu at the XLR outputs. The meters are peak

responding. This means that they have a fast attack and are able to

display fast transients accurately.

PFL A large red LED lights when a channel PFL is selected. This

indicates that the selected channel PFL signal is heard in the

headphones and displayed on the monitor meters. PFL also overrides

the local monitor if PFL ENABLE has been selected.

It is important to use PFL to set the channel gains correctly to maintain

the wide dynamic range achievable with this console. If set too high

then the signal may clip resulting in a harsh distorted sound. If set too

low then the signal-to-noise ratio is reduced and residual hiss may be

heard. You should adjust the channel gain so that the signal averages

‘0’ on the monitor meters with highest peaks no more than ‘+6’.

HEADPHONES LEVEL Adjusts the level of the signal in the stereo

headphones. This does not affect the level of the local monitor. Heed

the warning printed on the previous page regarding loud listening

levels.

MONITOR SOURCE SELECTOR A 9 way switch bank is used to

select which signal is heard in the headphones, local monitor and

displayed on the meters. This defaults to post-fader MIX2 signal with

all switches up. Press the required switch to monitor MIX1, AUX1 to 6,

or EXT IN 1(2). PFL automatically overrides the selected source.

Press a related pair of Aux switches to monitor them in stereo, for

example AUX5 on left, AUX6 on right. Press a single AUX switch to

check it in mono.

Switch priority is PFL overrides AUX1/2 overrides AUX3/4 overrides

AUX5/6 overrides EXT1 overrides EXT2 overrides MIX1 overrides

MIX2. For example you can select MIX1 as your source, then press

EXT1 to check a recording level without having to first deselect MIX1.

010

EXT1

EXT2

MIX1

ALL UP =

MIX2

AUX1

AUX3

AUX2

AUX5

AUX4

AUX6

5-6

3-4

1-2

-3

MONITOR

PFL

-12

-20

-30

-16

-9

-6

LEV

PRG

PFL

+16

SPLIT PFL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath MixWizard Series WZ20S Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info