541363
36
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
36 ML3000 User Guide
Press and Hold with GRP MUTE
View on channels
Assign MUTE and VCA groups:
Select using GRP MUTE
Assign using CH MUTES
ASSIGN
VIEW
How to Assign and View VCA and MUTE Groups
The same method is used to assign the VCA and MUTE groups. The groups
are assigned or viewed one at a time. Pressing ASSIGN puts the console
into assign mode. The channel mutes become edit keys to toggle them in or
out of the groups. The ASSIGN and selected group master keys flash to
warn that the console is in this mode. You can also view the group
assignments using the quick ‘press and hold’ VIEW function without the risk
of accidentally overwriting the settings.
To ASSIGN a Group
1 Press the ASSIGN key 1 . Its blue LED
flashes.
2 Now press one of the VCA or MUTE group
master MUTE keys 2 . This selects the group
to assign. Both the mute and the assign keys
flash.
3 View the current group assignments on the
channel GROUP ASSIGNED LEDs next to the
faders 3 .
4 Press the channel MUTE keys 4 to toggle the
channels in or out of the group. This does not
affect the channel mute status which remains
as it was before assign mode was entered.
5 Press another master MUTE key 2 to select
a different group to edit.
6 When you have finished, press the ASSIGN
key 1 again to exit assign mode.
To VIEW a Group
1 Press and hold down the VIEW key.
2 While holding down VIEW press and release
the master MUTE key of the group you wish to
check.
3 View the current settings on the channel
GROUP ASSIGNED LEDs next to the faders.
The channel mute function is not affected.
4 While holding down VIEW press each group
master MUTE key in turn to view the
assignments.
5 Release VIEW when you are finished.
Note: Brief instructions
are printed on the panel
next to the ASSIGN and
VIEW keys to remind the
operator.
C
ASSIGN
VIEW
M
A
S
T
E
R
M
A
S
T
E
R
M
A
S
T
E
R
M
A
S
T
E
R
M
A
S
T
E
R
M
A
S
T
E
R
M
A
S
T
E
R
M
A
S
T
E
R
M
U
T
E
M
U
T
E
M
U
T
E
M
U
T
E
M
U
T
E
M
U
T
E
M
U
T
E
M
U
T
E
MUTE GROUP MASTERS
VCA GROUP MASTERS
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Allen-Heath ML 3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info