Bedienungsanleitung Allen-Heath ML 3000 (Seite 38 von 48) (Englisch)

541363

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

38 ML3000 User Guide

HEADPHONES / LOCAL MONITOR and 2-TRACK

The Console Monitor System

The engineer is able to listen to any channel, mix or

matrix signal using stereo headphones and an

amplifier/speaker system connected to the local

monitor output. In addition the C output provides an

engineers wedge monitor feed when the console is

configured for on-stage monitor operation. All have

independent level control. The headphones are

plugged into the right of the meterpod.

The source is selected as either the 2-track input,

main LR mix, main C mix, or LR combined with C

for listening to a 3 output LCR system using the

stereo monitor. Pressing any console PFL or AFL

switch overrides this selection with a priority well

suited to live sound applications. The selected

source can be listened to in mono or stereo. All

monitor outputs automatically dim by 20dB when

the TALK switch is pressed. The main C LED and

VU meters automatically switch to monitor any

selected PFL or AFL source.

2TRK SOURCE Press this switch to listen to the

2-track input in the headphones, local, and

engineers wedge monitors. The signal is fed in

mono to the engineers wedge. This lets you check

the output of a stereo recorder. This selection

overrides any selected LR and C monitor source

until released. It is itself overridden by P/AFL. The

2TRK source is not sent to the meters.

LR SOURCE Press this switch to listen to the

main post-fade LR output in stereo. It is overridden

by the 2TRK and P/AFL selections.

C SOURCE Press this switch to listen to the main

C (centre) output in mono. As with LR it is

overridden by the 2TRK and P/AFL selections.

LCR Press LR and C together to monitor a 3

output LCR system in stereo. This mixes the C

signal equally into L and R.

MONO Press this switch to listen to the selected

monitor source in mono. This only affects the

monitor outputs. It is useful to check for mono

signal compatibility. If the signal drops in level or

loses quality when monoed then there may be a

problem with phasing between left and right.

LOCAL MONITOR LEVEL Adjusts the stereo

local monitor output level.

PHONES LEVEL Adjusts the level of the monitor

signal in the stereo headphones.

WARNING: To prevent damage to

your hearing start with the headphones level set

to minimum. Avoid continued high listening

levels in the headphones or any other earpiece.

2-TRACK Output

The 2-track output is sourced from the main LR mix.

The factory default setting is post master LR faders.

If you want to source pre-fader then replug the

internal jumper links on the LR MIX circuit board as

shown below. For stereo recording from a three

channel LCR mix, or by creating a new balance

from the groups, use the MATRIX outputs instead.

PHONES

100

MONO

2TRK

LCR

LOCAL

MONITOR

100

SOURCE

PRE-FADE

POST-FADE

PRE-FADE

POST-FADE

LEFT OUT

FADER

CONNECTORS

2-TRACK SOURCE

RIGHT OUT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath ML 3000 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info