Bedienungsanleitung Alpina C 1.8 (Seite 9 von 23) (Alle Sprachen)

732004

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

HOW TO READ THE MANUAL

Certain paragraphs in the manual contain particularly signicant

information and are marked with various levels of highlighting

with the following meaning:

NOTE

IMPORTANT

These give details or further informa-

tion on what has already been said, in the aim to prevent dam-

age to the machine.

WARNING!

Non-observance will result in the

risk of injury to oneself or others.

DANGER!

Non-observance will result in the

risk of serious injury or death to oneself or o thers.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING!

Read all safety warnings and all

instructions. Failure to follow the warnings and instruc-

tions may result in electric shock, re and/or serious in-

jury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-oper-

ated (corded) power tool.

1) Work area safety

a) Keep work area clean and well lit. Dirty or cluttered areas

invite accidents.

b) Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust. Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inuence of drugs,

alcohol or medication. A moment of inattention while oper-

ating power tools may result in serious personal injury.

b) Wear protective clothing. Always wear protective gog-

gles. Using personal protective equipment such as dust

mask, non-skid safety shoes, safety helmets or hearing pro-

tectors will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in

the «o»-position before connecting to power source,

picking up or carrying the tool. Carrying power tools with

your nger on the switch or energising power tools that have

the switch «ON» invites accidents.

d) Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct po wer tool

for your application. The correct power tool will do the job

better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it

on and o. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before mak-

ing any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power tools

are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may aect the power tool’s operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

g) Use the power tool, accessories and tool bits etc. in

4 SAFETY WARNINGS

3. SAFETY WARNINGS

Alpina C 1.8 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info