Bedienungsanleitung Alpina NJ 102 series (Seite 32 von 47) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

731600

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

WARNING! Reverse must be en-

gaged when the machine has stopped.

Hydrostatic transmission:

4.31 BRAKE PEDAL (Fig. 4.3 no.31)





4.32 CLUTCH PEDAL (Fig. 4.3 no.32)





speed.

 

-

ing that increasing the pressure on the





 



 



WARNING! Reverse must be en-

gaged when the machine has stopped.

NOTE If the drive pedal is used, wheth-

er forwards or for reverse, when the parking

brake (4.4) is engaged, the engine stops.

4.33 HYDROSTATIC TRANSMISSION

DISENGAGEMENT LEVER

(Fig. 4.3 no.33)





«A  



«B  



with the engine

turned off.

IMPORTANT To avoid damaging the

transmission unit, this operation must be car-

ried out only when the engine has stopped

with the pedal (4.32) at position «N”.

5. OPERATING INSTRUCTIONS

5.1 SAFETY RECOMMENDATIONS

WARNING! If the machine is likely to

be used mostly on sloping ground (never

steeper than 10°), fit counterweights (sup-

plied on request (see 8.1) beneath the cross-

member of the front wheels. These improve

stability at the front and reduce the chances

of tipping over.

IMPORTANT All the references relating to

the positions of controls are those described in

chapter 4.

5.2 WHY THE SAFETY DEVICES CUT IN



 



 



a

 

 

 

b

 

 -





 -



 





5.3 PRELIMINARY OPERATIONS BEFORE

STARTING WORK







5.3.1 Seat adjustment (Fig. 5.1)

-







5.3.2 Tyre pressure (Fig. 5.2)

-

-



-



adjust the pressure to the indicated values.

5.3.3 Filling with oil and fuel

NOTE The type of oil and fuel to use is given

in the engine manual.

Alpina NJ 102 series Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info