Bedienungsanleitung Alpina NJ 102 series (Seite 34 von 47) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

731600

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Mechanical transmission







-









WARNING! The pedal has to be re-

leased gradually, as a sudden engage-

ment may cause the vehicle to tip over

and the driver to lose control.



the throttle and gear lever. To change gear,



IMPORTANT Gear must only be engaged

when the machine has stopped.

Hydrostatic transmission:







-





WARNING! Drive must be engaged

as described below (see 4.32) to prevent

sudden engagement from causing tipping

up and loss of control of the vehicle, par-

ticularly on slopes.

5.4.3 Braking





-

chine until it stops.

Hydrostatic transmission:

-



5.4.4 Reverse

IMPORTANT Reverse must only be engaged

when the machine has stopped.

IMPORTANT To proceed in reverse gear with

the cutting means engaged, it is necessary to

press and hold the consent button (see 4.7) so

as not to cause the engine to stop.

Mechanical transmission











Hydrostatic transmission:

-





5.4.5 Grass cutting

Model 102



-



-



ground.











-



WARNING! This should always be

performed on both wheels, position-

ing them at the same height WITH THE

ENGINE OFF AND CUTTING MEANS

DISENGAGED.



 

 -



 





 





 







Alpina NJ 102 series Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info