Bedienungsanleitung Alpine CDE-134BT (Seite 11 von 43) (Englisch)

471330

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

11-EN

Presetting Stations Automatically

Press BAND repeatedly until the desired radio band is

displayed.

Press and hold TUNEA.ME for at least 2 seconds.

The frequency on the display continues to change while the

automatic memory is in progress. The tuner will automatically

seek and store 6 strong stations in the selected band. They will

be stored into preset buttons 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner

goes to the station stored in preset location No.1.

Note

• If no stations are stored, the tuner will return to the original station you

were listening to before the auto memory procedure began.

Tuning to Preset Stations

Select the band, and then press any one of the station

preset buttons (1 through 6) that has your desired radio

station in memory.

The display shows the band, preset number and frequency of

the station selected.

Note

•If the  indicator is illuminated, turn off the indicator by pressing

and holding FUNC.VIEW for at least 2 seconds, and then you can

perform the operation.

Frequency Search Function

You can search for a radio station by its frequency.

Press and hold ENTER for at least 2 seconds in Radio

mode to activate Frequency search mode.

Turn the Rotary encoder to select the desired frequency.

Press ENTER to receive the selected frequency.

Note

•Press  in the search mode to cancel. Or, the search mode will be

cancelled if no operation is performed for 10 seconds.

Turning AF (Alternative Frequencies) ON/OFF

The RDS (Radio Data System) is a radio information system using the

57 kHz subcarrier of regular FM broadcast. The RDS allows you to

receive a variety of information such as traffic information, station

names, and to automatically re-tune to a stronger transmitter that is

broadcasting the same programme.

Press and hold FUNC.VIEW for at least 2 seconds so that

the  indicator lights up.

Press 1AF to select the AF (Alternative Frequency) ON or

OFF mode.

Press and hold FUNC.VIEW for at least 2 seconds to

activate the normal mode.

The  indicator goes out.

Notes

• When the AF ON mode is selected, the unit automatically tunes to a

strong signal station in the AF list.

• Use the AF OFF mode when automatic re-tuning is not required.

• When the PTY31 (Emergency Broadcast) reception is set to on (refer to

“Setting PTY31 (Emergency Broadcast) reception” on page 12), if the

unit receives the PTY31 (Emergency Broadcast) signal, the unit will

show “ALARM” in the display automatically.

• Operate the unit while the  indicator lights up. If no operation is

performed for 5 seconds, the  indicator goes out.

The RDS digital data includes the following:

RDS

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

EON Enhanced Other Networks





/TA

AUDIO/SETUP

FUNC./VIEW

1/AF

2/NEWS

3/PTY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-134BT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-134BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info