Bedienungsanleitung Alpine CDE-134BT (Seite 12 von 43) (Englisch)

471330

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

12-EN

Receiving RDS Regional (Local) Stations

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the TUNER mode, and

then press ENTER.

BLUETOOTH  GENERAL  AUDIO  DISPLAY  TUNER 

iPod & USB

Turn the Rotary encoder to select the RDS REG mode, and

then press ENTER.

Turn the Rotary encoder to select ON or OFF.

In the OFF mode, the unit automatically keeps receiving the

related local RDS station.

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

•Press  to return to the previous mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

PI SEEK Setting

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the TUNER mode, and

then press ENTER.

BLUETOOTH  GENERAL AUDIO  DISPLAY  TUNER 

iPod & USB

Turn the Rotary encoder to select the PI SEEK mode, and

then press ENTER.

Turn the Rotary encoder to select ON or OFF.

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

•Press  to return to the previous mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

Setting PTY31 (Emergency Broadcast)

reception

Turn PTY31 (Emergency Broadcast) reception ON/OFF.

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the TUNER mode, and

then press ENTER.

BLUETOOTH  GENERAL  AUDIO  DISPLAY  TUNER 

iPod & USB

Turn the Rotary encoder to select ALARM, and then press

ENTER.

Turn the Rotary encoder to select ON or OFF.

If you set to ON, emergency broadcasts are received regardless

of source. “ALARM” is displayed during reception.

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

When an emergency broadcast is received, the volume level will

be automatically changed to the memorized level in the traffic

information mode. For details, refer to “Receiving Traffic

Information” on page 12.

Notes

•Pressing  during the procedure will return to the previous mode.

• If no operation is performed for 60 seconds in the SETUP mode, the

setting mode is cancelled.

Receiving Traffic Information

Press and hold TA for at least 2 seconds so that the “TA”

indicator lights up.

Press  or  to select your desired traffic information

station.

When a traffic information station is tuned in, the “TP” indicator

lights up.

Traffic information is heard only when it is being broadcast. If

traffic information is not being broadcast, the unit is set in the

standby mode. When a traffic information broadcast begins, the

unit automatically receives it and the display shows “T INFO”.

When the traffic information broadcast is over, the unit will

automatically set in the standby mode.

Notes

• If the traffic information broadcast signal falls below a certain level, the

unit remains in the receiving mode for 1 minute. If the signal remains

below a certain level for over 1 minute, the “TA” indicator blinks.

• If you do not want to listen to the traffic information being received,

lightly press  or  to skip that traffic information message. The

TA mode will remain in the ON position to receive the next traffic

information message.

• If the volume level is changed while receiving traffic information, the

changed volume level will be memorized. When traffic information is

received next time, the volume level will be automatically adjusted to

the level memorized.

• In the TA mode, the SEEK tuning selects only the TP stations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-134BT Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-134BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info