Bedienungsanleitung Alpine iDE178BT (Seite 19 von 53) (Englisch)

536907

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

19-EN

When the subwoofer is on, you can adjust the subwoofer output level

(refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/Balance

(Between Left and Right)/Fader (Between Front and Rear)/Defeat” on

page 17).

 Setting item: Subwoofer

Setting contents:

OFF / ON (Initial setting)

OFF:

No subwoofer signal is output from the Subwoofer RCA

Connectors (refer to “Connections” on page 50).

ON:

The subwoofer signal is output from the Subwoofer RCA

Connectors (refer to “Connections” on page 50).

The subwoofer output phase is toggled Subwoofer Normal (0°) or

Subwoofer Reverse (180°). To adjust the level, turn the Rotary encoder.

 Setting item: Subwoofer Phase

Setting contents:

0° (Initial setting) / 180°

When the subwoofer is on, you can select either System 1 or System 2 for

the desired subwoofer effect.

 Setting item: Subwoofer System

Setting contents:

System 1/ System 2 (Initial setting)

System 1:

Subwoofer level changes according to the main volume setting.

System 2:

Subwoofer level change is different from the main volume setting.

For example, even at low volume settings, the subwoofer is still

audible.

Connecting to an External Amplifier

When an external amplifier is connected, sound quality can be

improved by stopping the power supply of the built-in amplifier.

 Setting item: Power IC

Setting contents:

OFF / ON (Initial setting)

OFF :

Use this mode when the line output of this unit is used to drive an

external amplifier. In this setting, the head unit’s internal amplifier

is turned OFF and can not drive speakers.

ON :

The speakers are driven by the built-in amplifier.

Note

• No sound is produced by the system when the Power IC is set to OFF.

MX (Media Xpander) makes vocals or instruments sound distinct

regardless of the music source. The CD and iPod, etc. will be able to

reproduce the music clearly even in cars with a lot of road noise.

 Setting item: MX Setup

Turn the Rotary encoder to select the source to which you

want to apply Media Xpander, and then press ENTER.

 CMPM

*1/*2

 USB  iPod  BT Audio

 vTuner 

AUX

*1 Only for CDE-178BT/CDE-175R.

*2 Be applied for MP3/WMA/AAC files in disc.

*3 Only for CDE-178BT/iDE-178BT.

Turn the Rotary encoder to select the Media Xpander

level, and then press ENTER.

OFF  Level 1  Level 2  Level 3  Customize

Customizing the Media Xpander setting

If Customize is selected in step 2, you can modify the Media Xpander to

suit your personal preference.

Turn the Rotary encoder to select the Band, and then

press ENTER. Band1 (Low frequencies)  Band3

(High frequencies)

Band1 (Bass)  Band2 (Mid)  Band3 (High)

Turning Subwoofer ON/OFF

Setting the Subwoofer Phase

Setting the Subwoofer System

External Device

Setting the Media Xpander mode

(MX Setup)

OFF:

Front

Left

Amplier

Front

Right

Rear

Left

Amplier

Rear

Right

Speakers

SPEAKER

RIGHT FRONT

Front

Right

SPEAKER

RIGHT REAR

Rear

Right

SPEAKER

LEFT REAR

Rear

Left

SPEAKER

LEFT FRONT

Front

Left

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine iDE178BT Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine iDE178BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info