Bedienungsanleitung Alpine INE-W987D (Seite 81 von 121) (Englisch)

572055

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

81-EN

When an optional camera is connected, the view video of camera can be

output to the monitor.

Front camera or Rear camera can be connected to this unit.

Depending on your camera, please choose the connection method

(Direct or AUX) and camera type (Front, Rear or OTHER) first. For

details, refer to “Camera Setup” (page 68).

Front camera:

When the HCE-C212F/HCE-C200F is connected, conditions in

front of the vehicle, such as objects, people and other hazards,

can be seen.

Rear camera:

If an HCE-C210RD/HCE-C200R/HCE-C117D/HCE-C107D/

HCE-C115/HCE-C105 camera is connected, when the vehicle is

reversed, the rear camera view (guide marks for vehicle width

and available distance) is displayed automatically on the screen

of this unit.

Other camera:

Set when connecting to a camera other than the Front camera or

Rear camera, such as a room camera and side camera.

Rear Camera Operation

Set “Rear” for “Direct Camera Setting” (page 68) or “AUX Camera

Setting” (page 69).

Shift the gear lever to the reverse (R) position.

The rear view image is displayed while the car remains in

reverse.

If you shift the gear lever to a position other than

reverse (R), the monitor returns to the previous

screen.

• Never depend solely on the camera when backing up. Always turn

and look and only use the camera for additional assistance.

• This function is effective when the reverse wire is properly connected.

If the camera has a view switch function, the Direct Change switch is

displayed.

Touch the screen when the image from the rear

camera is displayed.

The operation screen is displayed on the screen.

• After a 5-second time-out, the operation screen returns to the

camera display screen.

Touch [Back], [Panorama], [Corner] or [Top].

The image pattern changes.

[Back]: Rear View

[Panorama]: Panorama View

[Corner]: Corner View

[Top]: Ground View

• For detailed information about image patterns, see the camera

Owner’s Manual.

Touch the screen when the image from the camera is

displayed.

The operation screen is displayed on the screen.

• After a 5-second time-out, the operation screen returns to the

camera display screen.

Touch [Guide OFF] on the Rear camera display

screen.

The guide disappears, and then the [Guide OFF] switch

changes to [Guide ON].

Touch [Guide ON] to turn on the guide.

Touch the screen when the image from the camera is

displayed.

The operation screen is displayed on the screen.

• After a 5-second time-out, the operation screen returns to the

camera display screen.

Touch [Caution ].

• For each touch, the caution location moves to the top or bottom of the

screen.

Camera Operation

(Optional)

You can adjust the quality of the camera image.

Setting items: Live Contrast / Bright / Colour / Contrast

Refer to “Visual Setting” (page 50).

Displaying the rear view video while the

car is in reverse

Switching the Image Pattern for the Rear

Camera

Guide Display ON/OFF Setting

Adjusting the Caution Display Location

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine INE-W987D Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine INE-W987D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info