Bedienungsanleitung Alpine INE-W987D (Seite 82 von 121) (Englisch)

572055

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

82-EN

About the Rear Camera Guide

To display the guide, set “Guide Display ON/OFF Setting” (page 81) to

On. Also, to adjust the guide, refer to “Adjusting the Rear/Front Camera

Guide” (page 68). You can also turn off the guide in the Rear camera

display screen.

Indication mark meaning

When the car is put into reverse gear, the monitor switches to the rear

view camera image. Guides appear to help visualise the car’s width and

distance from the rear bumper.

Car width extension marks (red, yellow and green in

order of distance)

If properly calibrated, the marks indicate the car’s width.

This helps guide the car’s path when backing up in a

straight line.

The marks represent the distance from the rear of the car

(from the rear end of the bumper).

• The marks do not move in synchronisation with the

steering wheel.

Distance guidance marks

The marks represent the distance from the rear of the car

(from the rear end of the bumper).

• The marks do not move in synchronisation with the

steering wheel.

• Each centre position of the mark represents about 0.5 m

(red), about 1 m (yellow) and about 2 m (green) behind.

• Depending on the condition of the car or road surface, the range of

vision may vary.

• The camera has a limited range of vision. Objects at extreme angles

to the camera (e.g. under the bumper or at opposite ends of the

bumper) may not be in the its field-of-vision.

• The rear camera image may have a tint which is different from the

actual surroundings.

• Depending on the car, the guidance may deviate to the right or left.

This is not a malfunction.

Distance guidance mark

The distance guides represent the ground level distance from the rear

bumper. It is difficult to accurately estimate the distance to objects

above ground level.

In the screen, according to the distance guidance marks,

the truck seems to be parked about 1 m away (at the

position B). In actual fact, however, if you reversed to

position A, you would collide with the truck.

In the screen, positions A, B and C seem to be located in

order of proximity. However, in actual fact, the position A

and C are the same distance, and B is farther away than

positions A and C.

• The car width extension mark represents the distance to the road

surface. The distance to an object on the road is not accurately

represented by the guides.

• In the following conditions, screen visibility may be impaired. This is

not a malfunction.

- When it is dark (during the night, etc.).

- Under very high or very low temperature conditions.

- When water drops adhere to the camera, or when the humidity

is high (such as rainy weather, etc.).

- When foreign bodies (such as mud, etc.) adhere to the camera

or its peripheral area.

- When sunlight or headlights directly strike the camera lens.

- When a CCD camera is connected, smearing* may occur. This

phenomenon is peculiar to CCD cameras.

A (about 0.5 m)

about 1 m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine INE-W987D Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine INE-W987D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info