Bedienungsanleitung Alpine RUX-C800 (Seite 27 von 67) (Englisch)

471407

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

25-EN

01GB06PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From a PC

Setting the Parametric EQ

The frequency bands of the graphic equalizer are fixed. This makes it

very difficult to correct for undesired peaks and dips at specific

frequencies. The parametric equalizer’s center frequency can be tuned

to these specific frequencies. Then, the bandwidth (Q) and level are

fine-tuned, independently, to make the necessary corrections. The

parametric equalizer function is an advanced tool for serious

audiophiles.

Click [P.EQ] for [Shortcut] tab in the main menu.

The EQ Setup screen is displayed.

• When you click [Mobile Sound Manager] on the Function switching

tab, and then [EQ Setup], the EQ Setup screen will also be displayed.

Refer to “Operating the Function Switching Tab” (page 7).

Click [P.EQ] in the main menu.

The EQ mode switches to the Parametric EQ mode.

• You can choose either Graphic EQ or Parametric EQ. When you

click [OFF], EQ mode becomes disabled.

Click either [ ] or [ ].

: Both R and L channels are set at the same value (The

initial setting).

: Channels R and L can be set independently.

• When you select “ ” a message to confirm which of the R or L

channel set up values is to be applied will be displayed. Click either

[LEFT] or [RIGHT].

Click the channel you want to adjust.

• Channels to be set vary depending on the system set in “Setting the

Speaker System (Output System Select)” (page 13).

Click each band and drag up or down to adjust the

level. Drag to the right or left to adjust the frequency.

Adjust the bandwidth (Q) by dragging diagonally on

the curve.

Band: Front/Rear/Center: 1 to 10

SubW: 1 to 5

Frequency: Front/Rear/Center: 20 Hz to 20kHz (in 1/6

octave steps)

SubW: 20 Hz to 200 Hz (in 1/6 octave

steps)

Level: -12 to +12 dB (in 0.5 dB steps)*

Q Factor: 0.5/1.0/1.5/2.0/2.5/3.0/4.0/5.0

* When ImprintEQ is enabled, 6 to +6 dB (in 0.5 dB steps)

• You can also make adjustments by operating the settings indication

area.

The current setup value will be displayed at the bottom of the screen.

Click [ ] and select and click a setup value. You can also use the

[Tab], [ ], [ ], [ ], and [ ] keys on your PC to select the

setup value.

To adjust another channel, repeat Steps 4 through 5.

• You can listen with Defeat OFF (adjusted setup values) or with

Defeat ON (Initial value) to compare, by clicking either [ON] or

[OFF] of “Defeat” in the main menu while in the adjustment mode.

• By clicking either [ ] or [ ] of “Mute” while in the adjustment

mode, you can mute the selected channel.

When setting is complete, click [Close Window].

• To enable this function, Defeat should be is set to ON.

• To restore the channel which is currently being adjusted to the

default, click [Ch. Flat]. To restore all the channels to the initial

settings, click [All Reset]. Click [OK] when each confirmation

message appears.

• When the speaker is set to the “OFF” mode, the parametric

equalizer for that speaker cannot be set. Refer to “Setting the

Speaker System (Output System Select)” (page 13)/ “Setting the

Speakers (Speaker Setup)/Setting the Subwoofers” (page 14).

• Check the playable frequency ranges of the connected speakers

before making equalizer adjustments. If the speaker’s playable

frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz

or 20 Hz band has no effect. Additionally, you may overload and

damage the speakers.

• If you boost the sound too much in the same frequency range,

distortion may occur.

01GB00PXAH800.book Page 25 Tuesday, February 8, 2011 9:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine RUX-C800 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info