Bedienungsanleitung Alpine X800D-ML (Seite 54 von 116) (Englisch)

572063

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

54-EN

Equalizer Presets

[EQ Presets] is selected on the Sound setup menu in step 3. Refer to

“Sound Setup Operation” (page 52).

10 typical equalizer settings are preset at the factory for a variety of

musical source material.

Setting item: EQ Presets

Setting contents: FLAT (Initial setting) / POPS / ROCK / NEWS /

JAZZ / ELECTRICAL DANCE / HIP HOP /

EASY LISTENING / COUNTRY / CLASSICAL

• Only one type can be set to ON.

• When Equalizer Presets setting is edited, a Downloaded Sound

Settings is disabled.

• When Equalizer Presets is set, the linked Parametric EQ settings are

also changed. We recommend storing Parametric EQ settings in a

Preset in advance.

• The Equalizer Presets setting can be configured when Defeat is

“Off”.

Adjusting the Parametric Equalizer

Curve (Parametric EQ)

[Parametric EQ] is selected on the Sound setup menu in step 3. Refer

to “Sound Setup Operation” (page 52).

You can modify the Equalizer settings to create a response curve more

appealing to your personal taste.

Setting item: Parametric EQ

Adjust the Parametric EQ to your preference.

Adjusting the Band

Touch [Band] to select the band to be adjusted.

• You can select a band directly by touching the screen.

Adjusting the Frequency

Touch [] or [] of “Freq.” to adjust the frequency of the

selected band.

Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps)

Adjusting the Level

Touch [] or [] of “Level” to adjust the level of selected

band.

Setting contents: -7 to +7

Setting the Bandwidth

Touch [] or [] of “Q Adjust” to select the bandwidth.

Setting contents: 1 / 2 / 3

To adjust another band, repeat step 1, and adjust all

bands.

To store the adjusted setting value, touch and hold

[Preset1], [Preset2], or [Preset3] for at least 2

seconds.

• BAND2 and BAND8 are the same as the Bass and Treble controls.

Their Level adjustment can also be controlled by pressing and

holding AUDIO and selecting Bass Level or Treble Level. Refer

to “Easy Sound Setup mode” (page 24).

• Settings exceeding the frequency of adjacent bands are not available.

• While adjusting the Parametric EQ, you should consider the

frequency response of the connected speakers.

• When the Parametric EQ is adjusted, the Equalizer Presets are

overridden.

• When Equalizer Presets is set, the linked Parametric EQ settings are

also changed. We recommend storing Parametric EQ settings in a

Preset in advance.

• Touch [Flat] to initialise all values.

• The Parametric EQ setting can be configured when Defeat is “Off”.

Calling the Parametric EQ adjusted value

Calling the pre-set Parametric EQ adjusted value.

Touch [Preset1], [Preset2], or [Preset3] on the

Parametric EQ screen.

The setting stored in the Preset will be recalled.

Band1 Band2

···

Band8 Band9

Band1: 20 Hz~100 Hz

Band2: 63 Hz~315 Hz

Band3: 125 Hz~500 Hz

Band4: 250 Hz~1 kHz

Band5: 500 Hz~2 kHz

Band6: 1 kHz~4 kHz

Band7: 2 kHz~7.2 kHz

Band8: 5.8 kHz~12 kHz

Band9: 9 kHz~20 kHz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine X800D-ML Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine X800D-ML

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info