Bedienungsanleitung Alpine X800D-ML (Seite 60 von 116) (Englisch)

572063

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

60-EN

Set the rating level of PARENTAL

4 Touch [Parental].

5 Touch [] or [] to turn “On”.

Select “Off” to cancel parental lock or if you do not want

to set a rating level.

6 Touch [] to return to the previous screen.

7 Touch [Parental Level]

8 Touch [] or [] to select the rating level (1 to 8).

The smaller the number, the higher the restriction.

9 Touch [] to return to the previous screen.

Changing the password

1 Touch [Password Change].

The numeric keypad screen is displayed.

2 Touch the input screen to enter a new 4-digit password.

• Keep a note of the number somewhere safe in case you should

forget it.

3 Touch [OK] to memorise the number.

4 Touch [] to return to the previous screen.

Use the procedure described below to modify the output screen

according to the type of TV monitor (rear monitor) being used.

If the rear monitor is not connected, the screen setting is 16:9.

Setting item: TV Screen

Setting contents: 4:3LB / 4:3PS / 16:9 (Initial setting)

• For some discs, the picture may not be set to the selected screen size.

(For details, refer to the explanation on the disc’s jacket.)

4:3 LETTER BOX:

Select this when connected to a conventional 4:3 size (normal

TV aspect ratio) monitor. There may be black stripes visible at

the top and bottom of the screen (when playing a 16:9 size

movie). The width of these stripes will depend upon the original

aspect ratio of the theatrical release of the movie.

4:3 PAN-SCAN:

Select this when connected to a conventional 4:3 size monitor.

The picture will fill the entire TV screen. However, due to the

mismatch in aspect ratio, parts of the movie at the extreme left

and right sides will not be visible (when playing a 16:9 size

movie).

16:9 WIDE:

Select this when connected to a wide screen TV. This is the

factory setting.

Radio Setting

[Radio] is selected on the Source setup menu in step 3. Refer to “Source

Setup Operation” (page 58).

Setting item: PI Seek

Setting contents: Auto / Off (Initial setting)

When Off is selected, the unit automatically keeps receiving the local

RDS station.

Setting item: RDS Regional

Setting contents: On (Initial setting) / Off

Changing the rating level temporarily

Some discs may request that you change the rating level set in

the default settings during playback. In this case, the message

“Do you wish to change Parental level? [OK] [Cancel]”.

If this screen appears, change the level as follows:

• To change parental level and play, touch [OK].

When [OK] is touched, the numeric keypad input screen is

displayed. Input the 4-digit password you set in “Setting the

Rating Level (Parental Lock)”, then touch [OK].

• To play without changing the parental level, touch [Cancel].

(If [Cancel] is touched, playback will be at the parental level set

in “Setting the Rating Level (Parental Lock)”.)

Setting the TV Screen Mode

PI SEEK Setting

Receiving RDS Regional (Local) Stations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine X800D-ML Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine X800D-ML

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info