7
will swith on and run continuously. When a comfortable level of humidity is reached,
turn the knob slowly anti-clockwise until the unit switches off. The dehumidifier will
now automatically maintain the humidity at this level.
TC 2000, SC 2000
The display [4] indicates the actual relative humidity level in the air. As soon as the
unit is switched on by the ON/OFF button (1), the indicator light CONT. [3b] will
come on and the unit is automatically set on continuous running. By depressing the
HUMISTAT button (3) repeatedly, you can choose from a range of relative humidity
settings [3a]. Generally, we feel most comfortable when the setting is between 50%-
60%. Select your preferred humidity level and the unit will run until the moisture in
the room reaches the desired level. From then on it will cycle on and off to maintain
the level chosen.
Push the HUMISTAT button (3), to select to run the dehumidifier continuously,
irrespective of how dry the air becomes. The control light CONT. [3b] will illuminate.
In most cases, you will see a reduction in condensation within a few days. In severe
cases, however, it may take several weeks to remove sufficient moisture to obtain an
acceptable humidity level. If the room is extremely moist, we advise to let the unit run
3-4 weeks continuously (by selecting the setting CONT. with the HUMISTAT button)
until the relative humidity in the room has reached an acceptable level. During that
time the indication in the display has to be watched closely.
Please note: if the moisture in the room reaches a relative humidity beneath 40 %,
the display shows the indication LO (= LOW).
Fan Speed Control (2)
The dehumidifier features a two speed fan control. When the unit is switched on, the
fan will start running in low speed. Select the desired speed with this switch.
TC 2000, SC 2000
When the unit is switched on, the fan will start running in low speed and the
indicator light LO [2] will illuminate. By pushing the SPEED button (2), you can
switch back and forth between high fan speed HI [2] for fast operation and low fan
speed LO [2] for quiet operation.
WATER FULL indicator [4]
When the water container is full, the WATER FULL indicator light will illuminate
and the unit will automatically shut off. It will also beep several times to advise you
hat the tank is full. See instructions for emptying the water container.
The WATER FULL indicator light will also illuminate and the unit will beep if the
water container has not been properly inserted or if it has been removed.
Remember not to use this dehumidifier in temperatures below 4 °C.
ENGLISH
