792117
12
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
6. 5 SPECTRUM CHART
This menu shows the spectrum chart of the setting frequency range. Please see below screenshot.
Press
▼/▲
to switch between current frequency, start frequency and end frequency:
Press
/
to change start or end frequency of the spectrum frequency range if the curse is focusing on the
start or end frequency icon.
User`s Manual
17 / 25
6.2
A
UTO
S
CAN
The meter will scan all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
6.3
RF
C
HANNEL
L
IST
This menu shows all the locked frequencies during Auto Scan.
6.4
S
COPE
This screen show 6 channels level (dBuV) in one page, use
[/] to move focus on channel number and press [OK]
change channel number.
6.
5
S
PECTRUM
C
HART
This menu shows the spectrum chart of the setting
frequency range. Please see below screenshot.
Press [/] to switch between current frequency, start
frequency and end frequency:
Press [/] to change start or end frequency of the
spectrum frequency range if the curse is focusing on the
start or end frequency icon.
40~50~60: The range of the level value. Press [F3] to switch range between 40~60,
40~80 and 40~100.
C6/175MHz/0 dBuV: The curse of the current frequency and power level. Press [/]
to change the value.
162: The start frequency of the spectrum chart.
498: The end frequency of the spectrum chart.
5V: Show the antenna power output 5V status. The 5v output is on if the
icon is green.
12V: Show the antenna power output 12V status. The 12v output is on if the
icon is green.
18V: Show the antenna power output 18V status. The 18v output is on if the
icon is green.
6.6
ANT
P
OWER
User can enable/disable the power supply for antenna. 5v, 12v and 18v output are supported.
40~50~60:
The range of the level value. Press [F3] to switch range between 40~60, 40~80 and 40~100.
C6/175MHz/0 dBuV: The curse of the current frequency and power level. Press
/
to change the value.
162: The start frequency of the spectrum chart.
498: The end frequency of the spectrum chart.
5V: Show the antenna power output 5V status. The 5v output is on if the icon is green.
12V: Show the antenna power output 12V status. The 12v output is on if the icon is green.
18V: Show the antenna power output 18V status. The 18v output is on if the icon is green.
6.6 ANT POWER
User can enable/disable the power supply for antenna. 5v, 12v and 18v output are supported.
7. DVBC
User can measure DVB-C live signal in this submenu. There are total six submenus: Cable Measure, Auto scan, RF
channel list, Tilt , Spectrum chart and Trunk voltage.
User`s Manual
18 / 25
7.
DVB-C
User can measure DVB-C live signal in this submenu. There
are total six submenus: Cable Measure, Auto scan, RF
channel list, Tilt , Spectrum chart and Trunk voltage.
7.1
C
ABLE MEASURE
User can read SNR, BER, PER, level, strength and quality of
the live signal.
: The lock status. The signal is locking if the icon is green otherwise the
color of the icon is red.
C18: The frequency channel name.
DVB C: The cable system. The values are DVB C ,DVB C2 and MCNS. Press [/]
to switch them.
FREQ: The current frequency. Press [/] to change the value or press [OK] to
edit it.
SYM: The symbol rate of the current signal. The device will get it
automatically once the signal is locking.
SNR: The signal noise rate value of the live signal.
BER: The bit error rate of the live signal.
PER: The packet error rate of the live signal.
LEVEL: The power level value of the live signal.
Str: The strength value of the connected signal.
Q l t : The quality value of the connected signal.
7.2
A
UTO
S
CAN
The meter will scan all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
7.3
RF
C
HANNEL
L
IST
This menu shows all the locked frequencies during Auto Scan.
7.1 CABLE MEASURE
User can read SNR, BER, PER, level, strength and quality of the live signal.
User`s Manual
18 / 25
7.
DVB-C
User can measure DVB-C live signal in this submenu. There
are total six submenus: Cable Measure, Auto scan, RF
channel list, Tilt , Spectrum chart and Trunk voltage.
7.1
C
ABLE MEASURE
User can read SNR, BER, PER, level, strength and quality of
the live signal.
: The lock status. The signal is locking if the icon is green otherwise the
color of the icon is red.
C18: The frequency channel name.
DVB C: The cable system. The values are DVB C ,DVB C2 and MCNS. Press [/]
to switch them.
FREQ: The current frequency. Press [/] to change the value or press [OK] to
edit it.
SYM: The symbol rate of the current signal. The device will get it
automatically once the signal is locking.
SNR: The signal noise rate value of the live signal.
BER: The bit error rate of the live signal.
PER: The packet error rate of the live signal.
LEVEL: The power level value of the live signal.
Str: The strength value of the connected signal.
Q l t : The quality value of the connected signal.
7.2
A
UTO
S
CAN
The meter will scan all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
7.3
RF
C
HANNEL
L
IST
This menu shows all the locked frequencies during Auto Scan.
User`s Manual
16 / 25
6.
DVBT/T2/ISDBT
User can measure the live DVB-T/T2 signal, analyze the
spectrum, the scope between transponders , auto scan all
the saved frequencies and list all the locked ones. There
are six submenus: Measure, Auto Scan, RF Channel List ,
Scope, Spectrum chart and ANT power.
6.
1
T
ERRESTRIAL
M
EASURE
The device will show SNR, CBER, VBER, power value,
strength and quality of the connected live signal. Please see
below for detail.
: The lock status. The signal is locking if the icon is green otherwise the
color of the icon is red.
C12: The channel name.
5V, 12V,18V: The antenna output voltage. The color of icon will be green once the voltage
is outputting or the color is gray.
DVB T2: The terrestrial system. The values are DVB T and DVB T2. Press [/]
to switch them.
FREQ: The current frequency. Press [/] to change the frequency or [OK]
to edit it.
BW: The bandwidth of the live signal. Press [/] to switch between 6M,
7M and 8M.
SNR: The signal noise rate value of the live signal.
CBER: The CBER(BER before FEC) value of the live signal.
LBER: The LBER(BER after LDPC) value of the live signal.
LEVEL: The power level value of the live signal.
Str: The strength of the live signal in percent.
Qlt: The quality of the live signal in percent.
: The lock status. The signal is locking if the icon is green otherwise the color of the icon is red.
C18: The frequency channel name.
DVB C: The cable system. The values are DVB C ,DVB C2 and MCNS. Press
/
to switch them.
FREQ: The current frequency. Press
/
to change the value or press [OK] to edit it.
SYM: The symbol rate of the current signal. The device will get it automatically once the signal is locking.
SNR: The signal noise rate value of the live signal.
BER: The bit error rate of the live signal.
PER: The packet error rate of the live signal.
LEVEL: The power level value of the live signal.
12
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Amiko TSC-1000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info