Bedienungsanleitung Arcam AV888 (Seite 12 von 74) (Englisch)

482343

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

E-10

TAPE

DVD

SAT

VCR

PVR

OPTICAL

COAX

DIGITAL AUDIO INPUTSOUT

Digital audio

connectors

TAPE, CD, AV, DVD, SAT, VCR, PVR

Connect these inputs to the digital

outputs of your available source

equipment.

OPTICAL, COAX

Connect the optical or coaxial output

to your digital recording device such as

CD-R, digital VCR or Minidisc player.

When a digital source is selected,

the digital output will send an exact

copy of the incoming digital signal. For example, for a

5.1 digital source, the digital output will also be in 5.1

format.

When an analogue-only source is selected, this is

digitized by the unit and routed to the digital outputs.

ese outputs are muted if a source is selected where the

HDMI connection is used and is transmitting HD audio.

e digital audio from the HDMI link will not be routed

to these outputs.

POWER/STANDBY

MUTEZONEDISPLAYDIRECTMODEINFOOKÐ INPUT +MENU Ð VOLUME +

POWER

AVR600

V I D E O S C A L I N G

PHONES

AUX

Front panel AUX input

e front panel AUX input can be

used as an analogue or optical

digital input.

For analogue sources, use a stereo

3.5mm lead; for digital sources

use a 3.5mm optical lead. e

front input is also used for the

auto-setup microphone input.

PHONO

(MM)

SW1

SW2

SBR

SBL

SBR

SW3

SBL

PRE AMP OUT

MCH INPUT

Phono

is input can be connected

directly to a record deck

which has a direct output

from a moving magnet (MM)

cartridge.

MCH input

is multichannel analogue

audio input can be connected to

a source device which outputs

surround sound on its analogue

outputs. Such devices typically

include DVD-Audio and SACD

players. is input does not

pass through any of the audio

processing in the unit, therefore

functions such as speaker size

and distance from the listening

position should be copied from the Setup menus into the

Setup menus of your multichannel source. Note however

that speaker level trims are applied to the MCH input

on the unit. erefore speaker level trim settings on

multichannel source equipment should be le unset at

zero.

Analogue pre-amplifier outputs

All pre-amplier analogue outputs are buered, have a

low output impedance, are at line level and follow the

Zone1 volume control setting. ey are able to drive

long cables or several inputs in parallel if required.

For more information on connecting speakers or

additional power ampliers, see page 23 and 53.

R L

TAPE

DVD

SAT

VCR

PVR

VCR

PVR

TAPE

ANALOGUE AUDIO INPUTSOUT

Analogue record

outputs

VCR OUT, PVR OUT, TAPE OUT

Connect the le and right

outputs to the le and right

input sockets of your cassette

deck, PVR or VCR (usually labelled ‘

RECORD’). e PVR

and VCR connectors may be used for a second and third

cassette deck. ese outputs are xed at full line level.

Analogue audio

inputs

TAPE, CD, AV, DVD, SAT, VCR,

PVR

Connect the le and right

inputs to the le and right

outputs of your source

equipment.

Front panel PHONES socket

is socket accepts headphones with an impedance

rating between 32Ω and 600Ω, tted with a 3.5mm

stereo jack plug. e headphone socket is always active,

except when AVR600/AV888 is muted.

When the headphone jack is inserted, the speaker

outputs and analogue pre-amplier outputs are

automatically muted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam AV888 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam AV888

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info