Bedienungsanleitung Arcam AV888 (Seite 54 von 74) (Englisch)

482343

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

E-52

network/usb

operation

e AVR600 and AV888 are tted

with a network audio client which

is capable of playing internet

radio stations as well as stored

music on a network storage

device such as a PC, or from a

USB ash drive. e network

audio client is an optional

extra for the AVR500, please

contact your dealer for upgrade

information.

For information on installing the AVR500, AVR600 or

AV888 on your network, see page 22.

e unit supports the following le formats:

MP3

WMA (Windows Media Audio)

WAV

FLAC (Free Lossless Audio CODEC)

MPEG-4 AAC (iTunes) with DRM10 support

Ogg Vorbis

Favourites

You can store tracks or radio stations in your ‘favourites’

folder for easy access later. Once playing, pressing

the FAV+ key adds the track to the ‘favourites’ folder.

Pressing FAV removes the track from the ‘favourites’

folder (this key only has an eect if the track is in the

favourites folder).

Selecting the playback source

Selecting the network client will allow playback of

internet radio stations and stored music on a networked

storage device or USB memory device.

To select the network source the CR102 remote must

rst be in

AMP device mode (press

). en press

on the remote to select the Network source. You

can also cycle to it using the INPUT / INPUT+ keys on the

front panel.

e ‘home’ page will display all available storage devices,

as well as your ‘favourites’ folder. Navigate through these

devices using the

and

keys. Folders that

may contain playable les have a symbol, playable

les have a symbol. Once you reach the track you wish

to play, press OK.

Once playing, pressing

OK again or

;

will pause the

track.

Pressing the

key skips forward one track. If the last

track is reached the key is ignored.

Pressing the

key skips back one track. If the rst track

is reached, the key is ignored.

Pressing and holding the

OK or

key for two seconds

stops playback.

e

key exits any navigation pages and shows the

“Now Playing” screen.

Pressing the

key on the remote plays the tracks in

the current folder in a random order.

Pressing the

key on the remote repeats the current

track, pressing it again repeats all the les in the current

folder, pressing it again cancels the repeat function.

NOTE

For playback from a network device, the network

device needs to running a universal plug and

play (uPnP) service, such as Windows Media

Player 11. is can be downloaded free of charge

from www.microsoft.com or installed via the

Windows update installer. Windows Vista™ has this

functionality built in.

Other free and paid-for uPnP services are available

for other computer operating systems. Some

network attached storage (NAS) systems include a

built-in version of a uPnP service.

USB playback

Insert a USB device into the socket on the rear panel and

select select the network client input. e USB device

appears in the list of folders that can be navigated.

Navigate to the music le and press the OK key.

Internet radio stations

Although you can manually enter the URL of an internet

radio station, the unit uses the vTuner service to allow

easy browsing of internet radio stations and podcasts. To

set up this service for your AVR500, AVR600 or AV888,

please visit www.arcamradio.co.uk

ere, you will be asked to enter the Media Access

Controller (MAC) address which is the unique ID of

your AVR500/AVR600/AV888. is MAC address can

be found in the network section of the setup menu.

Once you have entered the MAC address, you can then

browse stations and podcasts and set up groups of

favourite stations. When you next connect your unit to

the internet, these groups will appear in the selection

list.

Pressing the

INFO key will cycle what is shown on the

lower right portion of the front panel display between:

Elapsed Time (default)

Processing mode

Album (if available)

Artist (if available)

File information (bitrate, type).

iPod

It is possible to connect an iPod to

your AVR500, AVR600 or AV888

using either the Arcam rLead or

rDock accessories (please contact

your dealer).

Connect the 9-way plug into the

socket marked ‘rLead/rDock’ and

the audio leads to the AV input. If

your iPod has video output and you

are using the rDock, connect the

composite and S-Video leads to the

AV video inputs.

To select the iPod input, press the

key on the remote

while in

AMP Device Mode, or cycle to it using the

 INPUT / INPUT + keys on the front panel.

SIRIUS

DAB

ETHERNET

Z2 IR

IR OUT

TRIG Z1

Z1 IR

Z3 IR TRIG Z2

TRIG Z3

rLead/rDockRS232

USB

SIRIUS

ETHERNET

Z2 IR

IR OUT

TRIG Z1

Z1 IR

Z3 IR TRIG Z2

TRIG Z3

rLead/rDockRS232

USB

DAB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam AV888 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam AV888

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info