578766
9
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
AVR100
9
English
Speaker settings page
The size and number of loudspeakers are de ned on this page
of the OSD.
A LARGE speaker is one that is capable of handling a full
range signal (i.e. 20Hz20kHz).
A SMALL speaker is one that is not capable of
reproducing a deep bass signal (i.e. below 100Hz), for
example a satellite speaker.
ON is used when a speaker is active and receives the
intended audio information.
OFF is used when a speaker is inactive. Audio signals
intended for speakers set to OFF are redirected to the
main speakers.
Presets for typical speaker setups
To make setting up easier, the Arcam AVR100 has three factory
presets, describing three typical home theatre speaker setups.
Choose the preset that closest describes the loudspeaker
package you have.
PRESET 1 all large speakers and a subwoofer.
This preset is designed to play a full range signal through
each speaker. A subwoofer supports low frequency sound
reproduction
PRESET 2 large front left and right speakers, small
centre and small rear speakers.
This preset is designed to redirect the low frequency
information for the surround and centre channels to the
main speakers. There is no subwoofer output with this
preset.
PRESET 3 all small speakers and a subwoofer.
This preset is designed for systems with ve small
speakers combined with a subwoofer. The bass
frequencies from all channels are redirected to the
subwoofer.
Once you have chosen the preset that best describes your
loudspeaker package you can set the centre and surround
speakers to OFF if you do not have these in your system.
No subwoofer loudspeaker?
Regardless of the size of your main speakers, if you do not
have a subwoofer connected to your AVR100 you should select
PRESET 2, to direct low frequency information to the main
speakers.
1 INPUT SETTINGS
2 CHANNEL BALANCE
3 CHANNEL DELAYS
4 SPEAKER SETTINGS
5 EXIT
SETUP
SPEAKER SETTINGS
PRESET : 1
MAIN : LARGE
CENTER : LARGE
SURROUND : LARGE
SUBWOOFER : ON
DO NOT SAVE AND EXIT
SAVE AND EXIT
SPEAKER SETTINGS
PRESET : 1
MAIN : LARGE
CENTER : LARGE
SURROUND : LARGE
SUBWOOFER : ON
DO NOT SAVE AND EXIT
SAVE AND EXIT
SPEAKER SETTINGS
PRESET : 2
MAIN : LARGE
CENTER : SMALL
SURROUND : SMALL
SUBWOOFER : OFF
DO NOT SAVE AND EXIT
SAVE AND EXIT
SPEAKER SETTINGS
PRESET : 3
MAIN : SMALL
CENTER : SMALL
SURROUND : SMALL
SUBWOOFER : ON
DO NOT SAVE AND EXIT
SAVE AND EXIT
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arcam DiVA AVR100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info